Others
NO CARD:
Card is not inserted.
NO DATA:
There are no recorded files in the card.
UNPLAYABLE CARD:
You are attempting to play back data which is not compatible with this Camcorder.
CARD ERROR:
The Card is not compatible with this Camcorder.
COPY INHIBITED:
Because the medium is protected by a copy guard, images cannot be recorded correctly.
INCORRECT OPERATION:
The Recording Start/Stop Button was pressed without connecting the USB cable to the PC in Picture Playback Mode.
CANNOT USE USB
CHANGE MODE:
The USB cable is connected to the Camcorder in Card Recording Mode or Picture Playback Mode.
CANNOT OPERATE:
You are attempting to record pictures on a Card while connecting the USB cable to the Camcorder in Tape Recording/Playback Mode.
UNABLE TO WRITE (MULTI RECORDING):
The [PHOTO SHOT] Button is pressed when you are recording pictures on a Tape while setting the Digital Effect [MULTI] of [EFFECT1].
UNABLE TO WRITE:
The Recording Start/Stop Button is pressed when you are recording still pictures on the Card.
CASSETTE DOOR OPENED:
Close the Cassette Compartment Cover before recording.
NO TITLE:
Titles are not recorded.
UNABLE TO WRITE (WIDE MODE):
You are attempting to record pictures of S1 signal (with aspect ratio 16:9) by pressing the [PHOTO SHOT] Button.
FILE LOCKED:
You are attempting to erase protected files.
CARD LOCKED:
The write protection switch on the SD Memory Card is set to [LOCK].
DISCONNECT USB CABLE:
You are attempting to turn the Mode Dial or turn the Camcorder off in PC Mode while connecting the USB cable to the Camcorder.
Notes and Hints
Concerning the Power Supply
•When the Camcorder has been used for a long time, the Camera body becomes warm, but this is not a malfunction.
•If the [CHARGE] Lamp does not light up although the Battery is attached to the AC Adaptor, detach the Battery and reattach it.
Inserting/Removing the Cassette
•In the case of using a previously recorded Cassette, you can use the Blank Search Function (p. 24) to find the position where you want to continue recording.
•If a new Cassette is inserted, rewind to the beginning of the tape before starting recording.
•When inserting the cassette, make sure it faces in the right direction and then push it in until it stops.
•When the Cassette Holder is in action, do not touch anything except the [PUSH] mark.
•When closing the Cassette Compartment Cover, do not get anything caught in the cover, such as a cable of an optional stereo microphone (For
Alarm Sounds
When [BEEP SOUND] on the [INITIAL]
1 Beep
•When you start recording
•When you switch the [OFF/ON] Switch from [OFF] to [ON]
2 Beeps
•When you pause recording
2 Beeps 4 times
•If you perform a wrong operation before or during recording.
Recording Check
•For Recording Check, the recording speed mode (SP/LP) must be the same as the mode used for the recording. If different, playback images will be distorted.
Recording on a Card
•Even if the [SHTR EFFECT] is set to [ON], the Shutter Effect cannot be recorded on the picture.
•When the color of the screen changes or blurs, adjust the shutter speed manually to 1/60 or 1/100.
Photoshot
•Photoshot Recording results in slightly inferior image quality.
RapidFire Consecutive Photoshot
•One more still picture may be recorded after you release the [PHOTO SHOT] Button.
•The RapidFire Consecutive Photoshot and Title Function cannot be used simultaneously.
61