With a PC
3Click [ArcSoft].
4Select the desired language on the [Choose Setup Language] dialog, and click [OK].
•Installation begins.
•After reading the displayed contents, please carry out the installation according to instructions.
•If a language other than the OS language is selected, the characters may not be presented correctly.
5When the component selection screen is displayed, check the software to be installed and click [Next].
6 After the completion of setup, click on [Finish].
• Installation will be completed.
(For Macintosh)
1Turn on computer and start up Macintosh.
2Insert the
3Double click the Panasonic icon.
4Double click [ArcSoft] folder.
5Double click [PhotoBase] or [PhotoImpression] folder.
6Double click [English] or [French] folder.
7Double click [PhotoBase Installer] or [PhotoImpression Installer].
• Installation begins.
8Follow the instructions on the computer screen until the installation is complete.
To start ArcSoft Software (For Windows)
1Select [Start] >> [All Programs (Programs)] >> [ArcSoft Software Suite] >> [PhotoBase 4] or [PhotoImpression 4].
• For other information about ArcSoft Software, please refer to Help.
(For Macintosh)
1
•For other information about ArcSoft Software, please refer to Help.
For Information on ArcSoft Software:
TEL:
Web Site: www.arcsoft.com
If you no longer need software or driver (Uninstall)
The screens may vary with the type of the OS.
1Select [Start] (>> [Settings]) >> [Control Panel], select the software or the driver from [Add/Remove Programs] to uninstall.
•Uninstalling steps may vary depending on the OS. Please refer to the user manual of your OS.
2After software or driver is uninstalled, please restart your computer.
56 |
|
For assistance, please call : | |
|