Kenwood KDC-7024 Auto Memory Entry, Preset Tuning, Calling up the stations in the memory

The preset number display blinks 1 time.

On each band, 1 station can be put in the memory on each [1] — [6] button.

Auto Memory Entry

Putting a station with good reception in the memory automatically.

1Select the band for Auto Memory Entry Press the [FM] or [AM] button.

2Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

3Select the Auto Memory Entry mode Press the [FM] or [AM] button. Select the "Auto-Memory" display.

4Open Auto Memory Entry

Press the [4] or [¢] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.

• When the <AF (Alternative Frequency)> (page 40) is ON, only RDS stations are put in the memory.

•When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band aren't put in the memory. Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren't put in the memory.

Preset Tuning

Calling up the stations in the memory.

1Select the band

Press the [FM] or [AM] button.

2Select the key function section Press the [NEXT] button.

Repeatedly press the button until the function item is not displayed above the [2] — [5] button.

Refer to <Notes on Multi-function Key System> (page 8).

3Call up the station

Press the desired [1] — [6] button.

— 21 —