Kenwood KDC-M7024, KDC-7024 instruction manual Connecting Wires to Terminals Installtion

Page 44

Connecting Wires to Terminals

Installtion

English

2WARNING Connecting the ISO Connector

The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.

The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.

Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc.

1(Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A-4 pin (yellow) is connected to the constant power supply.

Unit	Vehicle
Ignition wire (Red)	A–7 Pin (Red)
Battery wire (Yellow)	A–4 Pin (Yellow)

Firewall or metal support

Screw (M4X8) (commercially available)

Self-tapping	Metal mounting
screw	Metal mounting
(commercially	strap
available)	(commercially
	available)

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

2The A-7 pin (red) of the vehicle's ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.

Unit	Vehicle
Ignition wire (Red)	A–7 Pin (Red)
Battery wire (Yellow)	A–4 Pin (Yellow)

3The A-4 pin (yellow) of the vehicle's ISO connector is not connected to anything, while the A-7 pin (red) is connected to the constant power supply (or both the A-7 (red) and A-4 (yellow) pins are connected to the constant power supply).

Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).

Unit

Ignition wire (Red)

Battery wire (Yellow)

Vehicle

A–7 Pin (Red)

Connect to a power source that can be turned on and

off with the ignition key.

— 44 —

Image 44

Contents KDC-M7024 KDC-7024 Contents Do Not Load 3-in. CDs in the CD slot Safety precautionsConnected to this unit Cleaning the Faceplate Terminals Cleaning the UnitCleaning the CD Slot Lens FoggingMarking of products using lasers Except for some areas About GSM Hands Free UnitSettings for your MP3 encoder and CD writer Acceptable mediaAcceptable medium formats Entering ID3 tagMP3 playing order When a File Search is executed with file ¡$ being playedWhen a Folder Search is executed with file ¡$ being played Setting each function Whats the Multi-function Key System?Displaying the desired function Real operational example of the Multi-function Key SystemAbout CDs General features PowerTurning on the Power Turing OFF the PowerVolume Increasing VolumeDecreasing Volume AttenuatorAudio Control 1st section2nd section 3rd sectionButton Adjustment Item Display Range Non-Fading 2nd section Button Adjustment Item Display Range Front/Rear50/80/120/Through Hz High Pass FilterDisplay Mode Switching Speaker SettingText Display Switching Tuner source CD & External disc sourceMP3 source Auxiliary input sourceExternal Display Switching Auxiliary Input Display SettingPanel Position Setting Non-fading OutputExit Panel Position Setting mode Press the RTN button Theft Deterrent PanelRemoving the Backpanel Reattaching the BackpanelTEL Mute Hiding the Control PanelDual Zone System In External disc or Auxiliary input source CA-C1AX Station Preset Memory Tuner featuresTuning Preset Tuning Auto Memory EntryCalling up the stations in the memory Call up the stationRDS features Traffic InformationRadio Text Scroll Receiving other traffic information stationsPTY Program Type Program Type preset Presetting the Program TypeCalling up the preset Program Type Changing Language for PTY FunctionCD/MP3/External disc control features Fast Forwarding and Reversing Playing CD & MP3Playing External Disc Track/File Search Track/File/Disc/Folder RepeatTurn ON/OFF the Repeat Play Press the 4 REP button Repeat play DisplayScan Play Magazine Random Play Function of disc changerRandom Play Folder Select Function of MP3Scrolling the folder name display Canceling the Folder Select modeDisc Naming Dnps Text/Title Scroll GSM Hands Free Unit control features Receiving a callPress the 1, 3 6 or Next button Information Name Telephone Number Hang upCanceling the Hands Free mode Switching between the Name and Telephone NumberPhone Book Search Direct Dial Function of the KCA-RC420Phone Book/ Message SMS data synchronize Synchronize the dataMenu System Security Code Standby modeMenu system Enter Security Code mode Display SettingSelect the digits to enter Press the 4 or ¢ button Confirm the Security CodeTouch Sensor Tone Manual Clock AdjustmentAuto Response time Adjust When hands free unit connecting Contrast Adjustment DSI Disabled System IndicatorSynchronize Clock Selectable IlluminationOFF Wait Time Setting System Q SettingEject angle setting Standby mode Switching preout Standby modeLocal SeekIn Tuner mode News Bulletin with Timeout SettingS. Bass Management System S. Frequency OffsetTuning Mode Tuner mode Auto Memory Entry Tuner modeRestricting RDS Region Region Restrict Function AF Alternative FrequencyPower OFF Timer Text ScrollExternal view AccessoriesInstallation Procedure Connection Connecting Wires to TerminalsCable Colour Functions Connecting Wires to Terminals Installtion Ignition wire Red Battery wire YellowRemoving the Unit Removing the hard rubber frameReattach the Backpanel Locking the Backpanel to the unitRemoving the Unit Troubleshooting Guide ? The power does not turn ON.01Tuner source MP3 source Messages shown below display your systems condition Specifications