Panasonic SDR-H50 Power supply, Charging the battery, Charging lamp Charge a

Page 14

Before using 2	Power supply

∫About batteries that you can use with this unit

The Panasonic battery that can be used with this unit is supplied battery/VW-VBG130/VW- VBG260/VW-VBG6.

Supplied battery/VW-VBG130/VW-VBG260/VW-VBG6 come with a function to check whether the battery and unit can be safely used together.

≥The battery pack holder kit VW-VH04 (optional) is necessary if using VW-VBG260/VW-VBG6.

It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.

≥Be aware that many batteries sold at extremely cheap prices or in situations where it is difficult to verify the actual products before purchase have proven to be counterfeit.

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery before using this unit.

Important:

If the DC cable is connected to the AC adaptor, the battery will not charge. Remove the DC cable from the AC adaptor.

A

2

1

Charging lamp [CHARGE] A

Lights up:

Charging (l 16, Charging time)

Goes off:

Charging completed

Flashing:

≥When the battery temperature is excessively high or low, the lamp flashes and the charging time will be longer than normal.

≥Remove dirt, foreign objects or dust on the terminals of the battery or the AC adaptor. If the lamp is still flashing, something may be wrong with the battery or AC adaptor.

Contact your dealer.

14

LSQT1346

Image 14

Contents SDR-H50 SDR-H40 Information for Your Safety English Use only the recommended accessoriesEMC Electric and magnetic compatibility Indemnity concerning recording content Carefully observe copyright lawsContents 100 Specifications 110Functions that cannot be used 105CD-ROM AccessoriesOptional accessories Using with a PC FeaturesUsing with a DVD burner Extended recordingPreparation Parts identification Before usingSlide open/close switch for the lens cover HandlingGrip belt Adjust the belt length and the pad positionLCD monitor 2527 Joystick Tripod receptacle About batteries that you can use with this unit Power supplyCharging the battery Charging lamp Charge aInserting the battery Removing the batteryCharging time Battery capacity indicationCharging time and recordable time Recordable timeConnecting to the AC outlet Connect the DC cable to this unitInstructions Capacity Before using 3 About HDD and SD cardsDisplay on the screen Indication in these FunctionsAbout the miniSD Card About SD cardsHttp//panasonic.jp/support/global/cs/ecam SD card handling 16 GBAccess lamp HDD handlingSecurely close the SD card slot cover Rotate the mode dial to OFFCardInserting/removing an SD Turning the unit on/off Selecting a modeHow to turn the power on and off with the LCD monitor To turn onTo get back to the previous screen Setup 2 Using the menu screenPress the Menu button To exit the menu screenMotion picture recording menus Language selectionMenu list Motion picture playback menus Photo SetupStill picture recording menus Still picture playback menus¬ Rotate the mode dial to select or Setting date and timePress the Menu button to finish the setting Select the menu. lBrightness Setup 4 Adjusting LCD monitorSetup # LCD SET # YES ColourRecording Basic camera positioning About auto modeBefore recording Media Select # HDD or SD Card Recording motion picturesPress the recording start/stop button to start recording To end the recordingSelect the menu. l24 Screen indicationsAudio recording modes ¬ Select SD Card in Media SelectRecording modes and recordable time HDDSize of still pictures Selected recording destination Recording still picturesPress the recording start/stop button Quality of still pictures To record still pictures clearlyPicture Size Select the menu. l24 Number of pixels and picture qualityRecording with a shutter sound effect Select the menu. l PICT.QUALITY Select the menu. l24Zoom in/out function ¬ Rotate the mode dial to selectRecording functions Move the zoom leverRecording yourself Quick startImage stabilizer function Press the O.I.S. buttonSelect an icon with the joystick To cancel the functionOperation icons Operation icons Video recording modePicture recording mode SDR-H50Backlight Help modeSoft skin mode CompensationSDR-H60/SDR-H50 ØSelf-timerTo stop the timer midway through PRE-RECMenusRecording functions MenusManual recording functions Manual modeManual focus mode Press the Manual AF/MF buttonSelect the manual mode. l44 Select the menu. l Scene modeTo cancel the scene mode function Manual adjustment mode Manual focus adjustmentSelect the white balance mode with the joystick White balanceWhen the display stops flashing, the setting is complete White balance sensor aTo restore to automatic adjustment Press the Auto button Manual shutter speed/ aperture adjustmentAdjust the settings with the joystick Select the manual mode. l44 Select or with JoystickPlayback Motion picture playback Select the scene to be played back, then press the joystickTo change the playback speed Setup # Resume Play # onTo cancel the resume function Resuming the previous playback Select the menu. l24Playing back motion pictures by date Playing back a playlistSelect the playback operation with the joystick Still picture playbackSelect the file to be played back, then press the joystick About still picture compatibility Deleting multiple scenes/ files Deleting scenes/filesDeleting scenes/files one at Time Press the button during playbackTo continue deleting other scenes/files Deleting the copied scenes collectivelyPress the button To complete editingLocking motion pictures To complete the settingsEditing scenes Select the scene to be protected, then press the joystick¬ Select HDD in Media Select Dividing a scene to deleteSelect the scene to be divided, then press the joystick Dividing a scene to delete To continue dividing and deleting other scenesUsing playlists Creating a new playlistEditing a playlist Deleting scenesMoving scenes within a playlist Adding scenes to playlistSelect the menu. l24 Edit # ADD # YES Scenes can be added to the created playlistSelect the file to be protected, then press the joystick Editing still picturesLocking still pictures Dpof setting To cancel all Dpof settingsSelect the file to be copied, then press the joystick Copying still picture filesSelect Select or ALL then press the joystick To continue copying other files To cancel copying halfwayCopying still picture files Formatting HDD HDD and SD cardManagement Displaying HDD informationTo watch images with a 169 aspect ratio on a regular TV Playback on TVStart playback on this unit About discs that can be used SDVD burner/VW-BN1 ≥ We recommend using VW-BN1With a DVD burner DVD Copy functionInsert the disc in the DVD burner Connecting this unit to the DVD burnerConnect this unit to the AC adaptor Copying all the scenes to discs Select menus with the following proceduresDVD Copy function Copying added scenes to discsSelect the scenes to be copied and then press the joystick Favourite Scenes functionSelecting the scenes to copy to 1 disc Burn Disc # HDD or SD Card # Video # Favourite Scenes #Select Date Selecting the scenes by date to copy to discsSelecting the scenes by playlist to copy to discs About the time it takes to copy Disc type Copy timePlaying back a disc inserted in the DVD burner Dubbing images onto other video devices Using SD card slot of other video devicesWith other video devices To stop dubbingSelect PictBridge # HDD or SD Card then press the joystick With a printer PictBridgeConnect this unit to a printer No frame print Select Print # YES and press the joystickStandard Frame printWith a PC What you can do with a PC Adobe ReaderCPU Operating environmentVideoCam Suite RAMSD card reader function mass storage End User License Agreement Article 8 Termination of LicenseClick Install to start the installation process Setup 1 InstallationInstalling VideoCam Suite Check the contents, then close the windowUninstalling the software Connect this unit to a PC Connection and recognitionAbout the PC display Select PC Connect # HDD or SD Card then press the joystickExample folder structure When accessing the cardTo disconnect USB cable safely Double click the icon in task trayUsing VideoCam Suite Reading the operating instructions of the softwareConnect this unit to a PC. l86 Press the DVD Copy button ¬ Insert a DVD disc in a drive for DVD writing on the PCIf using a Macintosh Others Media indications Recording indicationsNo.10 Playback indications0h00m00s Card l Indications when other products are connectedConfirmatory indications Error OCCURRED. Recording is Stopped HDD Backup RecommendedThis Card Cannot Record in Video Mode This Battery Cannot be UsedAbout recovery Functions that cannot be Used simultaneouslyWith a DVD burner Frequently asked questionsWhat should I do when the HDD is full? What kind of cards can be used on this unit?Is playback and editing possible on a PC? With a PCCan I write data from a PC onto the unit’s HDD or SD card? Troubleshooting 100Auto focus function does not work 101Operation arbitrarily stops 102 Scenes or files cannot be deleted or edited103 Push the ResetSWITCH. is displayed With a PC 104With other products 105 When carrying the unit, do not drop or bump itAbout this unit 106 About the batteryAbout the AC adaptor Licenses About condensationCauses of condensation 107Automatic white balance White balance adjustmentExplanation of terms Auto focus109 Recording a subject with little contrast110 SpecificationsSD Card/Hard Disk Video Camera USB111 112 Number of recordable pictures on the HDD or an SD card 113