HDD handling
This unit has an internal HDD. The HDD is a precision instrument so take care when handling it.
∫Do not cause any vibrations or impacts to this unit
The HDD may no longer be recognised or recording or playback may no longer be possible. In particular, do not cause any vibrations or impacts during recording or playback.
∫Do not drop this unit
The HDD may be damaged if this unit receives a strong impact due it to being dropped etc.
This unit has a drop detection function to protect the HDD from impact if the unit is dropped. If it detects that the unit has been dropped during motion picture recording, the HDD protection operation sound may be recorded. Also if it detects that the unit is being continuously dropped, recording or playback may stop.
∫Take note of the temperature of this unit
It may no longer be possible to record or playback if the temperature of this unit is too high or low. A warning message will appear on this unit’s LCD monitor if an irregularity in the temperature is detected. (l 95)
∫Do not use the unit in a low pressure area
The HDD may be damaged if you use this unit where the altitude is more than 3000 m.
∫Back up important recorded data to protect it
Save recorded data periodically on a PC, DVD disc, etc. for backup purposes.
If the HDD fails, the recorded data cannot be repaired.
∫Cautions for disposing of this unit
Even if some scenes on the HDD are deleted or formatted, the information is seemingly erased but may still remain. To dispose of this unit, the physical destruction is recommended.
∫Notes for recording
Images may not be recorded properly to the HDD near
∫Indemnity about recorded content
Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non- HDD related component).
Access lamp
B A
AHDD access lamp [ACCESS HDD]
≥When this unit accesses the HDD, the lamp lights up.
≥When lamp is on, do not
sExpose the unit to strong vibrations or impacts
sOperate the mode dial
sRemove the battery or disconnect the AC adaptor
≥Performing the above while lamp is on may result in damage to data/HDD or this unit.
BSD card access lamp [ACCESS]
≥When this unit accesses the SD card, the lamp lights up.
≥When lamp is on, do not
sOpen the SD card slot cover and remove the SD card
sOperate the mode dial
sRemove the battery or disconnect the AC adaptor
≥Performing the above while lamp is on may result in damage to data/SD card or this unit.
21
LSQT1346