Manual shutter speed/ aperture adjustment
Shutter Speed:
Adjust it when recording
Aperture:
Adjust it when the screen is too bright or too dark.
1 Select the manual mode. (l44)
2 Select [
] or [
] with the
joystick.
MNL
3/3NEXT
3 Adjust the settings with the joystick.
A | MNL |
| |
| 1/100 |
B | OPEN |
BACK
AShutter speed:
1/25 to 1/8000
1/25 to 1/500
≥The shutter speed closer to 1/8000 is faster.
≥If [AUTO SLW SHTR] is set to [OFF], the
slowest shutter speed is 1/50.
BIris/Gain value:
CLOSE # (F16 to F2.2) # OPEN # (0dB to 18dB)
SDR-H50/SDR-H40
CLOSE # (F16 to F2.0) # OPEN # (0dB to 18dB)
≥Value closer to [CLOSE] darkens the image.
≥Value closer to [18dB] brightens the image.
≥When the iris value is adjusted to brighter than [OPEN], it changes to the gain value.
48
To restore to automatic adjustment Press the AUTO button.
≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value.
∫Manual shutter speed adjustment
≥ Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.
≥ If you increase the shutter speed manually, the noise on the screen may increase.
≥ You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction.
≥ During normal playback, image movement may not look smooth.
≥ When recording in an extremely bright place, the screen may change colour or flicker. If so adjust the shutter speed manually to [1/50] or [1/100].
∫Manual iris/gain adjustment
≥If the gain value is increased, the noise on the screen increases.
≥Depending on the zoom magnification, there are iris values that are not displayed.
LSQT1346