Panasonic SDR-S10 operating instructions 104

Others

Problem

Check points

	≥ Is manual focus mode selected?
	# Set the unit to auto focus mode by pressing the AUTO
Auto focus	button.
	≥ Are you trying to record a scene which is hard to
function does not	bring into focus in auto focus mode?
work.	# There are some recording subjects and surroundings
	for which the auto focus does not operate correctly.
	(l 112) If so, use the manual focus mode to adjust the
	focus. (l 55)
Sound is not	≥ Is the volume too low?
played back from
	# During playback, press the volume button to display
the built-in speaker
	the volume indication and adjust it. (l 62)
of this unit.
	≥ This is a mechanical sound of the camera, but it is not
During playback,	a malfunction.
	≥ Are there drops of water on the microphone?
the sound from the
camera’s motor is	# The recorded mechanical sound may become louder
	and the microphone’s sensitivity may decrease when
heard in the
	there are drops of water on the microphone.
recording.
	Wipe off any drops of water and then leave the unit to
	dry naturally.
The speaker	≥ Are there drops of water on the microphone?
	# The volume of the output sound may decrease when
volume during	the speaker is wet.
playback is low.	After wiping off any drops of water and then leaving the
	unit to dry naturally, it will return to normal.
Although this unit	≥ Have you selected video input on the TV?
is correctly	# Please read the operating instructions of your TV and
connected to a TV,	select the channel that matches the input used for the
playback images	connection.
cannot be seen.	≥ Is the [TV ASPECT] setting correct?
The playback
	# Change the setting to match the aspect ratio of the TV.
images are	Press the MENU button, then select [SETUP] #
squeezed	[TV ASPECT] # [16:9] or [4:3] and press the cursor
horizontally.	button in the centre.

104

VQT1E14