Setup
2Close the LCD monitor while the mode dial is set to or .
A
The status indicator A flashes green and the unit goes into quick start standby mode.
3Open the LCD monitor.
A
The status indicator A lights red and the unit is put into recording pause approx. 1.7 seconds after it is turned on.
To cancel Quick start
Press the MENU button then [SETUP]
#[QUICK START] # [OFF] and then press the cursor button in the centre. ≥ The status indicator goes off and the
power turns off if the mode dial is set to OFF while the unit is in quick start standby mode.
≥ The status indicator goes off and the power turns off if quick start standby
mode continues for approx. 5 minutes.
≥Quick start standby mode is cancelled, the status indicator goes off and the power turns off in the following cases. jWhen the mode dial is switched.
≥When this unit is
≥When this unit is
≥If [POWER SAVE] is set to [5 MINUTES] and the unit automatically goes into quick start standby mode, close the LCD monitor and then open it again.
25