Panasonic SDR-S10 operating instructions Messages, Cannot Record

Page 98

Others

Messages

CANNOT RECORD.

Data writing to the SD card has failed.

 

There are no motion pictures or still pictures

 

recorded on the SD card.

NO DATA.

If this message appears although data is recorded

on the SD card, the condition of the card is probably

 

 

not stable.

 

Turn off the power and then turn it on again.

THIS CARD CANNOT

An 8 MB or 16 MB SD card has been inserted in

RECORD IN VIDEO MODE.

video recording mode.

CHECK CARD.

This card is not compatible or it cannot be

recognised by the unit.

 

CARD LOCKED.

The write protection switch on the SD card is set to

LOCK. (l 17)

 

CARD FULL.

 

SCENE NUMBER IS FULL.

The SD card is full or the number of scenes or

programmes has reached the maximum limit so no

CANNOT RECORD. THE

further data can be recorded. Delete unnecessary

NUMBER OF PROGRAM IS

scenes (l 66) or insert a new SD card.

FULL.

 

CARD DOOR OPENED.

The card/battery door is open. Close it.

 

≥ When using an SD card that can be used for

 

motion picture recording (l 17)

 

When this message appears, it is recommended

 

that you format the SD card being used. (l 70)

ERROR OCCURRED.

When an SD card is formatted, all the data recorded

on it will be deleted. Back up the data on the SD

RECORDING IS STOPPED.

card to a computer, etc. before formatting the SD

 

 

card.

 

≥ When using any other card

 

Use a Panasonic SD card or another SD card which

 

can be used to record motion pictures. (l 17)

 

 

98

VQT1E14

Page 97 Page 99
Image 98
Page 97 Page 99
Contents Operating Instructions For United Kingdom Dear CustomerBefore use Information for your safetyHow to replace the fuse Use only the recommended accessories EMC Electric and magnetic compatibilityFor the purposes of these operating instructions Indemnity concerning recording contentCarefully observe copyright laws For business users in the European UnionVQT1E14 Contents Motion picture playback Still picture playback TroubleshootingSpecifications EditingWater resistance FeaturesBefore using Sales and Support Information For United Kingdom Shock proofAccessories Optional accessoriesCard slot SD Card l Battery slot Batt lOpen l 14, 19 Before using 16 17 LCD monitor l To use as a grip belt About the Card/battery door and the Terminal coverStrap fixture Attach the 2-way hand strap 1 to this unitAttaching to a tripod Using the LCD monitorAdjust the angle of the LCD monitor as desired To detach from the tripodCapacity SD cardConcerning the cards that can be used on this unit RecordingAbout SD cards that you can use for motion picture recording Handling precautions SD Speed Class Rating Class¬ Rotate the mode dial to select OFF Power supplyInserting the battery and charging the battery SetupAbout charging errors When the status indicator is off Connecting to the AC outletTo remove the battery Recordable time Charging time and recordable timeCharging time How to turn on the power Selecting a modeSelecting a mode Turning the unit on/off How to turn off the powerTo turn off the power How to turn the power on and off with the LCD monitorTo turn on the power Quick startOpen the LCD monitor Close the LCD monitor while the mode dial is set to orTo cancel Quick start Inserting/removing an SD card Insert/remove the SD card into/from the card slotBasic operations How to use the cursor buttonCard access lamp Down Left Right Press to select the itemPress the cursor button up, left or right to select an item Operations during recordingOperations during playback Press the cursor button up, down, left or right to operateAbout the operation icons displayed in each mode Video recording modeSetup Video playback mode Setup Picture recording mode Picture playback modeTo exit the help mode Switching the languageHelp mode Press the cursor button right to selectUsing the menu screen While stopped, press the Menu buttonTo exit the menu screen Setting date and timeTo get back to the previous screen For Australia Changing the date and time display styleChanging the display style To cancel Power LCD Adjusting the LCD monitorAdjusting the brightness and colour level Before recording Basic camera positioningAbout auto mode Recording motion pictures To end the recordingRecording time elapsed Screen indications in the video recording modeRecording mode Remaining time left for recording 256 MB 512 MBRecording ≥ Recordable time using the battery l To record still pictures clearly Rotate the mode dial to select Press the record buttonRecording still pictures Recording with a shutter operation effect Screen indications in picture recording modePicture quality for still picture recording Size of still pictures Remaining number of still picturesDigital zoom function ¬ Rotate the mode dial to select Press the zoom buttonZoom in/out function Press the cursor button up to select ª Backlight compensation functionTo use the zoom microphone function To return to normal recordingPress the cursor button left to select To cancel fadingFade in/fade out function Start recording. FadePress the cursor button up to select Colour night view functionTo select the colour for fade in/ out To cancel the soft skin mode Soft skin modeTo cancel the Colour night view function Press the cursor button left to select Ø Self-timer recordingTo stop the timer midway through Recording guideline function Wide modeTo cancel the Recording guideline function Recording images with a 169 aspect ratioTo cancel the image stabilizer function Image stabilizer functionWind noise reduction function Scene modeTo cancel the wind noise reduction function To cancel the scene mode function Manual focus adjustment To restore to the automatic adjustmentUnder incandescent lamps Outdoor modeWhite balance Select and then fill the screen with a white subject To set the white balance manuallyAbout the white balance sensor a Manual shutter speed/ aperture adjustment To restore to automatic adjustmentManual shutter speed adjustment Manual iris/gain adjustmentSelect the scene to be played back Rotate the mode dial to selectMotion picture playback Press the cursor button in the centreSlow-motion playback About motion picture compatibilityFast forward/rewind playback Playing back motion pictures by date To adjust the volumeFrame-by-frame playback Resuming the previous playback Still picture playback Select the file to be played backAbout still picture compatibility Deleting scenes one at a time EditingDeleting scenes Deleting multiple scenes from the thumbnail displayTo complete editing To continue deleting other scenesTo stop halfway through the deletion To complete the settings Locking scenesTo cancel all Dpof settings Dpof settingWhat is DPOF? Card management Formatting an SD cardWith other products With a TVPlayback on TV Start playback on this unit To watch images with a 169 aspect ratio on a regular TVTo display the on-screen information on the TV screen With a DVD recorder Copying dubbing recordings onto a DVD recorderWith a VCR Recording dubbing images onto other video devicesWith a printer PictBridge To stop recording dubbingConnect this unit to a printer When you want to stop printing halfway Select the paper size setting on Paper SizeSelect the layout setting on page Layout Video editing software MotionSD Studio 1.2E With a computer WindowsWhat you can do with a computer Acrobat ReaderEnd User License Agreement Operating environment MotionSD Studio 1.2EOther Disc driveInterface RequirementsMicrosoft Windows XP Home Edition Click MotionSD Studio 1.2E Installing MotionSDInsert the CD-ROM into the computer Click NextWith a computer Connection and recognition procedures Reading the MotionSD Studio operating instructionsConnect this unit and a computer If the driver has been recognised properly If the driver has not been recognised properlyExample folder structure About the computer displayDrive icons Closing MotionSD Studio Using MotionSDStarting MotionSD Studio Click at the very bottom of Tool BOXSoftware uninstallation To disconnect the USB cable safelyTo disconnect USB cable safely With a computer MacintoshCopying still pictures onto the computer Motion picture recording menus MenusMenu list Still picture recording menusStill picture playback menus Play Setup Play Mode l 62 Resume Play l 63 Lock SET lMotion picture playback menus Beep Menus related to SetupOFF BeepsDemo Mode Recording indications IndicationsIndications No.10 Playback indicationsConfirmatory indications Number displayMessages Cannot RecordAbout recovery Functions that cannot be used simultaneously 101 TroubleshootingBattery has worn out and can no longer be used 102 103 104 105 106 Cable is 107Others With a computer 108 When carrying the unit, do not drop or bump itAbout this unit Others For AustraliaBe sure to detach the battery after use About the batteryWhen you are not going to use the unit for an extended time Prepare spare batteries when going out for recording110 About the AC adaptorAbout the SD card 111 LCD monitorAbout condensation White balance Explanation of termsAutomatic white balance Auto focusRecording a subject behind dirty or dusty window Concerning MPEG2 motion pictures113 Recording a subject in dark surroundings114 SpecificationsSD Video Camera 115 116 16 MB Number of recordable pictures on an SD card117 32 MBNumerics Index118 119 VQT1E14
Top Page Image Contents