Recording
To set the white balance manually
1Select [
] and then fill the screen with a white subject.
MNL
BACKK
2Press the cursor button up to select [
].
MNL
BACK
When the [ 
] display changes from flashing to on, setting is complete.
≥When the [ 
] display continues flashing, the white balance cannot be set because the place is dark etc. In this case, use the automatic white balance.
∫About the white balance sensor A
A
The white balance sensor detects the type of light source during recording.
Do not cover the white balance sensor during recording or it may not function properly.
≥When the [
] display flashes, the manual white balance previously adjusted is stored.
Whenever recording conditions change,
≥When setting both the white balance and the iris/gain, set the white balance first.
57