Menu operations
Basic setting menu operations
_Displaying the menus
User menu
1Press the MENU button.
The camera’s USER menu screen now appears on the viewfinder or monitor.
USER MENU
Operation
Painting
Maintenance
2Turn the JOG dial to select the menu item.
3After having selected the item, press the JOG dial to access that item’s menu.
Operation
VF Setting1 VF Setting2 VF Display1 VF Display2 Setting1 Setting2 Setting3
INCOM !LED 7"VF
_Entering the menu data
After accessing the item menus, enter the respective data.
1Turn the JOG dial to select the menu item to be set.
VF Setting1 |
|
Side Modulation | 15 |
Zone Mark | 13:9 |
Safety Mark | 16:9 |
Center Mark | OFF |
Center Mark Sel 1 | |
Line Width | 4 |
2When the JOG dial is pressed, the setting of the item indicated by the arrow flashes.
VF Setting1 |
|
|
|
|
|
|
|
|
Side Modulation |
|
|
| 15 |
|
|
|
|
|
|
| ||||||
Zone Mark |
| 13:9 | ||||||
| ||||||||
Safety Mark | 16:9 |
|
| |||||
| ||||||||
Center Mark | OFF | |||||||
Center Mark Sel 1 | ||||||||
Line Width | 4 |
|
|
|
|
|
| |
3Turn the JOG dial to change the setting.
VF Setting1 |
|
|
|
|
|
|
Side Modulation | 15 |
|
|
| ||
| ||||||
Zone Mark |
|
| 4:3 |
| ||
|
| |||||
Safety Mark | 16:9 | |||||
Center Mark | OFF | |||||
Center Mark Sel 1 | ||||||
Line Width | 4 |
|
|
| ||
4When the JOG dial is pressed, the data is entered.
VF Setting1 |
|
Side Modulation | 15 |
Zone Mark | 4:3 |
Safety Mark | 16:9 |
Center Mark | OFF |
Center Mark Sel 1 | |
Line Width | 4 |
<Note>
Bear in mind that if, in step 3, the MENU switch is set to OFF while the setting is flashing, the setting prior to the flashing will remain unchanged.
22