Panasonic AK-HC930P manual Attaching the viewfinder, Detaching the viewfinder

Page 12

Performing the viewfinder adjustments

(The viewfinder is an optional accessory.)

Attaching the viewfinder

1	Check that the camera’s POWER switch is at the OFF	5 Connect the plug to the viewfinder’s connector.
	position.	<Note>
2		When connecting the plug to the viewfinder’s
2	Attach the accessory mounting plate to the viewfinder.	connector, ensure that it is fully and securely inserted.

Remove mounting plate from the viewfinder

Mounting plate supplied to AK-HC930P

Detaching the viewfinder

3Pull up the knob on the mounting plate and slide the plate to attach the viewfinder.

Pull up the knob

1Check that the camera’s POWER switch is at the OFF position.

2Loosen the stopper screw, pull up the knob on the mounting plate and slide the viewfinder along and off the plate.

Stopper screw

Pull up the knob

3 Disconnect the plug from the viewfinder cable connector.

4Tighten the stopper screw securely.

Stopper screw

12

Image 12

Contents Model AK-HC930P For your safety FCC NoteContents Features OverviewControls and their functions FDdUlti Format Power LED Power circuit breaker BreakerIncom connectors 1, 2 INCOM1, INCOM2 INCOM1 MIC ON/OFF switch MIC1 TalkRCB connector RCB External power supply input connector DCMIC1 selector switch MIC1 F/R Rear MIC1 connector MIC1Electronic shutter selector switch Shutter AWB/ABB start switch Auto W/B BALVTR start/RET selector switch VTR/RET Lens connector LensMounting the lens Mount cap Lens clamp leverCenter mark Adjusting the lens flange back Adjustment methodAbout 10 ft 3 m Attaching the viewfinder Detaching the viewfinderStopper screw Lever Viewfinder Connecting a microphone Microphone Holder Audio in switchMIC in connector Clamp screwMounting the camera on a tripod Detaching the camera from the tripod attachmentTripod attachment Tripod platform Tripod attachment Red leverComponent system configuration System block diagramOutline of peripheral components Component connections in an SD systemSystem connections 1 with Multi-Format Camera 2z viewfinderLens Multi-Format Camera ROP cable Remote operation panelSystem connections 2 with build-up unit Large lens Build-up unitSystem connections 3 with MSU AK-HC930PStatus displays on viewfinder screen Basic setting menu operations Menu operationsUser menu When the JOG dial is now pressed, the data is entered Setting menu configuration Hierarchical menusOperation Painting Linear MatrixMaintenance DTL1AK-HC930P Connector pin assignment OPT Fiber EDW.3K.93C.TLC HirakawaExternal dimension drawings 8 z 231.5 mm14-3/8z365 mm 11-1/16z280 mm 5z 126 mmSpecifications Input/output signalsOptional connectors Basic itemsExecutive Office Southeast RegionCentral Region Government Marketing Department