Specifications
|
|
|
|
|
| Power supply: | DC 12 V (when external power |
| |
|
|
| is supplied) |
|
|
| AC 150 |
| |
|
|
| is connected) |
|
| Power consumption: | 33 W | (during external |
|
|
|
| power supply |
|
|
|
| operation) |
|
|
| 43 W | (when CCU is |
|
|
|
| connected) |
|
|
|
|
|
|
1 indicates safety information.
Operating temperature |
| |
range: | 32oF to 104oF (0oC to +40oC) | |
Storage temperature |
| |
range: | ||
Operating ambient |
| |
humidity: | Less than 85% | |
Weight: | Approx. 10.7 lbs (4.85 kg) | |
Dimensions: | 5 | |
|
| (excluding protrusions) |
|
| 126 k 280 k 365 mm |
Basic items |
| |
1) | Pickup device: | 2/3z 2.2 million pixel FITCCD x 3 |
2) | System: | GBR pickup system |
3) | Color separation |
|
| optical system: | f/1.4 prism |
4) | Optical filters: | CC: 3200K, 4300K, 6300K, Cross |
|
| Diffusion |
|
| ND: CAP, Through, 1/4, 1/16, 1/64 |
5) | Lens mount: | Bayonet type |
6) | Output standard: | SMPTE 296M |
7) | Sensitivity: | f/10.0, 2000 lux, 3200 K, white |
|
| reflectance 89.9% |
8) | Horizontal modulation: | More than 45% (27.5 MHz) |
9) | S/N ratio: | 54 dB (Y: 30 MHz) |
10)Horizontal frequency: 33.716 kHz,
11)Vertical frequency: 59.94 Hz, interlace
Input/output signals |
| |
1) | Mic input: | |
|
| (XLR |
|
| Gain selected by switch |
2) INCOM: | 0 dBm/600 ohms | |
|
| (XLR |
|
| (Mixing is controlled separately for |
|
| PGM1 and PGM2.) |
3) | Monitor output: | HD signals = |
|
| Output signals can be selected |
|
| using the monitor output selector |
|
| switch. |
4) | QTV output: | VBS signal = 1 |
|
| (BNC) |
5) | G/L input: | 1 BNC connector |
6) | AUX output: | VBS signal = 1 |
|
| (BNC) |
|
| (when optional unit has been |
|
| installed) |
Control |
| |
1) | Power selection: | EXT, OFF, CCU |
2) | USER SEL: | Functions specified by menu items |
|
| can be allocated to the switch. |
3)RET A/B selection: For selecting the return signal
4)Front tally selection: Front tally HIGH, LOW, OFF (VF unit)
5)Viewfinder marker
selection: | Center marker, safety zone, 4:3 |
| marker |
6) Gain selection: | LOW, MID, HIGH |
7)Output selection: CAM, BAR, TEST
8)White balance mode: A, B, preset
9)Shutter speed
selection: | 1/100, 1/125 1/250, 1/500, 1/1000, |
| 1/2000 |
10)AWB, ABB settings
11)Menu selection
12)CALL SW
13) | INCOM: | MIC ON/OFF, receive or PGM level |
14) | MIC setting: | MIC power, MIC gain, MIC1 |
|
| selection |
15) | Optical filter setting: | REM, LOCAL selection and LOCAL |
|
| setting |
*When the CCU is connected, the selection functions for 6) to 10) are not effective.
Optional connectors |
|
1) VTR output | |
| JAE) |
Weight and dimensions shown are approximate. Specifications are subject to change without notice.
29