Panasonic AK-HBU931P manual Controls and their functions, Front Panel

Controls and their functions

Front Panel Top Panel

1

5

4 6

32

1Lens guide

The 2/3z box-type lens is attached by hooking it onto this guide. Align the guide pin of the lens with the center groove, and attach.

2Lens anchoring knob

This is rotated clockwise to anchor the lens.

3Lens connector

Lens connector (57-20360 made by DDK)

Pin No.	Signal	Pin No.	Signal
1	N.C.	19	N.C.
2	N.C.	20	N.C.
3	N.C.	21	TALLY CONT1
4	DC +12V	22	N.C.
5	POWER GND	23	N.C.
6	SIGNAL GND	24	LENS CODE (A)
7	DOBY GND	25	LENS CODE (B)
8	EXT. MODE (A)	26	LENS CODE (C)
9	EXT. MODE (B)	27	LENS CODE (D)
10	EXT. MODE (C)	28	EXT CONT A
11	16:9/4:3 SEL	29	EXT CONT B
12	IRIS POSITION	30	N.C.
13	ZOOM POSITION	31	INCOM1 PROD/ENG
14	RET1	32	INCOM2 PROD/ENG
15	RET2	33	INCOM1 SW
16	FOCUS POSITION	34	INCOM2 SW
17	IRIS CONTROL	35	N.C.
18	IRIS AUTO/REMOTE	36	N.C.

4Camera mounting base

This is used to attach the camera. For details, refer to the operating instructions of the camera concerned.

5Optical fiber cable for connecting camera [CAM]

Use this to connect the unit to the optical fiber connector on the multi-format camera (AK-HC931P).

6Interface cable for connecting camera [EXT I/O]

Use this to connect the unit to the EXT I/O connector on the multi-format camera (AK-HC931P).

Pin No.	Signal	Pin No.	Signal
1	BU ACTIVE	11	MONITOR SIGNAL
2	ANALOG GND	12	MONITOR GND
3	RET-1	13	DC +5 V
4	RET-2	14	DC +3.15 V
5	RET-3	15	DC +2.7 V
6	DIGITAL GND	16	IRIS CONTROL
7	CAMERA DATA	17	IRIS POSITION
8	CAMERA CONTROL	18	ZOOM POSITION
9	DC +12 V	19	FOCUS POSITION
10	POWER GND	20	IRIS AUTO/REMOTE

4