Marker switch, ND filter indicators 1 to

;4:3 MARKER switch

This is the 4:3 marker ON/OFF switch. When the 4:3 marker is ON, the brightness modulation can be set to ON or OFF.

This is used to vary the brightness modulation level outside the 4:3 marker.

This is used to select the ND filter position. It is effective when the LOCAL switch is held down.

These indicate the positions of the ND filter.

This is used to enable the ND or CC filter to be selected at the camera.

This is used to select the CC filter position. It is effective when the LOCAL switch is held down.

These indicate the positions of the CC filter.

This is used to set the menu to ON or OFF and display the status.

This is used to change the menu page and select the data. For details, refer to the operating instructions of the multi-format camera (AK-HC931P).

This is used to select the RET A switch. When it is lighted, the video signals of RET A selected by the camera are output to the viewfinder.

This is used to select the RET B switch. When it is lighted, the video signals of RET B selected by the camera are output to the viewfinder.

This enables control to be exercised over the ON/OFF status of the items selected on the camera’s menus.

This is used to vary the amount of detail to be provided for the viewfinder’s video output.

This is used to select the viewfinder’s video output from the Y/C, R, G or B camera video signals.

This lights when the lens extender of the large lens is ON.

This is used to set the picture-in-picture function on the viewfinder screen to ON or OFF.

This is used to select the picture-in-picture display position on the viewfinder screen.

This lights when the shrinker of the large lens is ON.