When using for the first time, be sure to adjust the 3D Conversion Lens attachment position.
• Change the mode to .;; on the video camera.
1 Attach the 3D Conversion Lens to the video camera. (.. 10)
2 Turn on the video camera.
•Turn on with the video camera in a horizontal state.
•The 3D Conversion Lens adjustment mode screen will appear automatically after performing the initial setting.
•If the 3D Conversion Lens adjustment mode screen does not appear automatically, set from the menu on the video camera.
([SETUP] ~ [3D CONV. LENS SETUP])
3 Attach the lens front cap to the 3D Conversion Lens. (.. 14)
'·,·."·...,," .AQ~9~T ... ,·,·,
o Guide Line
•2 screens will appear.
•The horizontal line for adjustment on the lens front cap is displayed on the screen.
4 Touch [ADJUST].
•If the black vertical line and the black horizontal line are within the red guidelines 0 and adjustment is not
required, touch [EXIT] and proceed to Step 11.
•Perform the adjustment in a bright location where the horizontal line for adjustment will be clearly visible.
15
(ENG)VQT3A68