Do not allow any insecticide or volatile substance to get on the 3D Conversion Lens if they are used in the surrounding area.
•Failure to observe this may result in deformation or the coating peeling off.
Do not use solvents such as benzine, thinner, alcohol, etc., for cleaning.
•Solvents may cause discoloration or damage.
•Do not touch or contaminate the surface of the protective glass. Blow any dust off using a commercially available blower brush and wipe gently with a dry soft cloth if contaminated.
•Do not use any kitchen detergent or chemical treated wipes.
When requesting a repair of the 3D Conversion Lens, request a repair of the video camera as well, as the cause of the problem may be in the video camera.
• About 3D recording
Attach the 3D Conversion Lens securely. It must not be used with an insecure attachment.
Be sure to perform the convergence adjustments before use. Recording with a misaligned lens may lead to eye fatigue or discomfort. The lens should be aligned each time it is
With the 3D Conversion Lens attached, do not record a subject at less than the minimum focus distance. Only record subjects that are beyond 1.2 m (3.9 feet).
•The 3D effects may be more pronounced, and therefore cause tiredness or discomfort.
•The minimum focus distance is approx. 1.2 m (3.9 feet).
When recording with the 3D Conversion Lens attached, be careful not to shake the video camera.
•Tiredness or discomfort may result if the shake is pronounced, due to riding in a vehicle or walking etc.
•When moving the video camera as you record, move it slowly.
•We recommend using a tripod.
5
(ENG)VQT3A68