Do not drop or strike the 3D Conversion Lens when carrying it.
Also, be careful not to apply strong force to the 3D Conversion Lens.
•Be careful that no shock is applied to the 3D Conversion Lens by dropping or striking the bag with the 3D Conversion Lens stored within. It may cause a malfunction or stop images from being recorded. It may also damage the 3D Conversion Lens.
•Do not carry the video camera with the 3D Conversion Lens attached by holding onto the 3D Conversion Lens only.
4
Do not use or store the 3D Conversion Lens in the following places since it may cause a failure or malfunction.
-In direct sunlight or at the beach in summer, etc.
-Areas with high temperature and/or humidity, or where there is rapid change in temperature and/or humidity
-Areas with a lot of sand and dust
-Areas close to fire
-Close to
-Areas where it may get wet
-Areas with vibration
-inside a car
•Do not disassem ble or modify.
•When the 3D Conversion Lens has not been used for a long period of time, check to see if there is any looseness in the attachment of the 3D Conversion Lens and adjust the attachment position before use.
•When not in use, put the lens caps on, place it inside the lens storage bag, and store in a place with low humidity.
•Also read the operating instructions of the video camera.