Panasonic vw-clt1 owner manual Convex o the concave

2 For users who have [HDC-SD90]/[HDC-TM90]

Remove the lens rear cap from the step up ring and attach the step up ring to the 3D Conversion Lens.

•Attach the step up ring to the 3D Conversion Lens first, and then attach the step up ring part to the video camera.

•Video is not recorded properly when only the step up ring is attached to the video camera.

•Attach the step up ring to the 3D Conversion Lens with the [.. UP] mark side up .

~

o the convex o the concave

3 Match the position of the convex e with the concave e in the video camera.

•Attach with the adjustment dial cover e of the 3D Conversion Lens facing upwards.

•You cannot attach the 3D Conversion Lens together with the lens hood or a filter etc.

•Tighten the attachment screw of the 3D Conversion Lens by rotating to LOCK.

11

(ENG)VQT3A68