∫Detaching the Lens
≥Check that the camera is turned off.
While pressing on the |
|
lens release button D, |
|
rotate the lens toward the | |
arrow until it stops and |
|
then remove. |
|
• Attach the lens rear cap so that the lens contact point does not get scratched.
•Attach the body cap to the camera so no dirt or dust will get inside the main unit.
∫Attaching and Detaching the Lens Cap Pinch the lens cap as shown in the figure to attach or detach.
• Be careful not to lose the lens cap.
∫Attaching the Lens Hood (Supplied Accessory)
Insert the lens hood into the lens with the short sides at the top and bottom, and turn in the direction of the arrow until it stops.
E: Fit to the mark
•When taking pictures with the flash with the lens hood attached, the lower portion of the screen may turn dark (vignetting effect) and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood.
•When using the AF assist lamp in the dark, detach the lens hood.
7
VQT3N27