∫About Condensation (Fogging of the
Lens)
≥ Condensation occurs when there are differences |
in temperature and humidity as described below. |
Condensation can cause the lens to become dirty |
and lead to mold and malfunctioning, so exercise |
caution in the following situations: |
– When the camera is brought indoors from outside |
during cold weather |
– When the camera is brought into an air- |
conditioned car |
– When cold air from an air conditioner is directly |
blown onto the lens |
Supplied Accessories
[Inspection to be performed when you unpack the unit]
When removing the unit from its packing box, check that the main unit and the supplied accessories are there and also check their external appearance and functions to verify that they have not sustained any damage during distribution and transportation.
If you discover any trouble, contact your vendor before using the product.
Product numbers correct as of January 2014. These may be subject to change.
– In humid places |
≥ Put the camera into a plastic bag to allow it to |
acclimatize to the surrounding temperature in |
order to prevent condensation. If condensation |
occurs, turn the power off and leave it for about |
two hours. Once the camera acclimatizes to the |
1
VFC4430
2
VYC1132
3
VYF3565
4
VFC4605
surrounding temperature the condensation will go |
away naturally. |
1Lens Storage Bag
2Lens Hood
3Lens Cap
4Lens Rear Cap
(The lens rear cap and lens cap are attached to the interchangeable lens at the time of purchase.)
5