≥When flash recording with a close subject, the light of the flash will be blocked by the lens and part of the picture may be dark. Check the distance from the subject when recording.
≥Operating sounds may be recorded when auto- focusing during motion picture recording. If operating sounds become bothersome, we recommend setting to manual focus (MF) and fixing focus before recording to avoid recording the lens noise.
≥If you set the [O.I.S.] to [ON] when recording a motion picture, operating sounds may be recorded. If they become bothersome, we recommend setting the [O.I.S.] switch to [OFF] and mounting the camera on a tripod.
≥The aperture can be adjusted with the aperture ring only when a Panasonic digital camera is attached to the lens. (As of January 2014)
Attaching/Detaching the Lens
Check that the camera is turned off.
≥ Remove the lens rear cap from the lens.
∫Attaching the Lens
Align the lens fitting marks A on the camera body and the lens and then rotate the lens in the direction of the arrow until it clicks.
• Do not press the lens release button B when you attach a lens.
•Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched.
•Check that the lens is attached correctly.
•Be sure to remove the lens cap when recording.
∫Detaching the Lens
While pressing on the lens release button B, rotate the lens toward the arrow until it stops and then remove.
• Attach the lens rear cap so that the lens contact point does not get scratched.
•Attach the body cap to the camera so no dirt or dust will get inside the main unit.
7