Panasonic SV-AV10B, SV-AV10EN Power Supply, Using AC Adaptor, Using the Battery

Page 6

1

DC IN 4.8V

1

2

Using the Battery

1

2

DC IN 4.8V

3

4

Removing the Battery

Power Supply

ªUsing AC Adaptor

1Connect the AC Mains Lead to the AC Adaptor and the AC mains socket.

The AC Mains Lead does not fit entirely into the AC Adaptor socket. A gap will remain as shown 1.

2Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device.

The SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

ªUsing the Battery

1While holding the [ ] part, slide it to remove the Battery Compartment Cover.

2Press the terminals of the battery onto the terminals of the Battery Compartment and set the battery.

Fit the battery with its label facing upward. After the battery is set, close the cover.

3Connect the AC Mains Lead to the AC Adaptor and the AC Mains socket.

4Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device.

Power Lamp flashes, and Charging starts.

5Wait until Power Lamp goes off.

When recharging is completed, Power Lamp goes off.

Disconnect the DC cord and hold down the [ ] button for two seconds or more, and the SD Multi AV Device is turned ON.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

When the Battery Level Indicator indicates [ ], the battery will run out in a few minutes. Recharge the battery.

It takes about 120 minutes, maximum for full-charging. (The charging times are for normal ambient temperature (20° C/60%). If the Battery is

charged at a higher or lower temperature, the charging time may be longer)

When recharging, turn the power of the SD Multi AV Device OFF.

If the Power Lamp flashes quickly (or slowly) when recharging,

recharging is not normal. (l 34)

When the battery is running out while the SD Multi AV Device is being used, the Power Lamp starts to flash. Recharge the battery or use the SD Multi AV Device with the DC cord connected.

If you disconnect the DC Input Lead or the AC Mains Lead while charging the Battery, Power Lamp flashes several times and goes off. For continuing Battery charge, wait for about 1 minutes, and then connect the AC Mains Lead and the DC Cord.

6

Image 6
Contents Model No. SV-AV10E/B/EN Contents Information for Your Safety How to replace the FuseBefore Use Power supply frequency Standard AccessoriesOptional Accessories IntroductionControls and Components Attaching the Neck StrapUsing the Battery Power SupplyUsing AC Adaptor Using the Battery Removing the BatteryRemoving the Card Using the LCD MonitorInserting a Card Inserting a Card Removing the CardAbout the Operation Mode Turning the Power onTurning the Power OFF Selecting Operation ModesREC Mode Using the Menu ScreenªREC Mode List of MenusPlayback Mode Sub-Menu for REC ModeSub-Menu for Playback Mode Sub-Menu for PlaybackSetting the power supply frequency To Release this modeTo Adjust Adjusting Brightness and Colour LevelSetting Date and Time Press the Menu Button to exit the date settingTo stop recording Display in the moving picture MPEG4 modeRecording the Moving Picture MPEG4 Press the Recording Start/Stop ButtonTo stop playback Set the Operation Mode to PLAYMPEG4Playing the Moving Picture MPEG4 To find the beginning of a moving picture fileDisplay in the Still picture mode Recording Still PicturesTo play the next previous file Set the Operation Mode to PlaypicturePlaying back Still Pictures While playing back, press down the centre of the Jog LeverDisplay in the Voice Mode Recording Voice Voice Recording FunctionHearing the Voice Recorded Playback Sound Fast forward fast backward playbackTo find the beginning of a voice file ≥Music cannot be heard without connecting the earphone Listening to Music Music PlayTo find the beginning of a music file Plug the earphone terminal into the jack Using the EarphoneAdjusting the Volume While playing back, press the MODE/VOL ButtonAdjusting White Balance Backlight Compensation FunctionTo Resume Normal Recording Set Erase ALL Files on the Card Editing 4 Menu to YES Erasing the Files Recorded on a CardTo erase All Files Select YES Press the Menu Button twiceTo lock all files Protecting the file Lock SettingTo release the lock setting Select Unlock in StepWriting Printing Data on a Card Dpof Setting To release all the Dpof settingsTo cancel the Slide Show Playing back still pictures one by one Slide ShowFormatting the Card Operating environment Installing SD-MovieStage Information ªCharge the built-in battery for maintaining the dateStarting SD-MovieStage After UseUsing a Card in a Personal Computer Constructing a Folder when the Card is used with a PCIndications Displayed by the text LOW Battery Card FullAbout the AC Adaptor Optimal Use of the BatteryAbout the Lens About the LCD MonitorProtect Switch State of Power Lamp while chargingFogging of lens Before Requesting Service Specifications SD Multi AV DevicePage Page Информация О Сертификации Продукции

SV-AV10EN, SV-AV10B, SV-AV10E specifications

The Panasonic SV-AV10E, SV-AV10B, and SV-AV10EN are portable digital audio and video recorders designed to cater to various multimedia needs. These compact devices are well-regarded for their versatility and user-friendly features, making them suitable for amateur and professional use alike.

One of the main features of the SV-AV10 series is its ability to record high-quality video and audio in a portable format. With a built-in MPEG-4 compression system, these devices allow users to capture and store video and audio without sacrificing quality. The compact design makes them easy to carry, ensuring that users can document important moments or create content wherever they may be.

Another laudable characteristic of the SV-AV10E, SV-AV10B, and SV-AV10EN is their long battery life, offering users extended recording times. This is particularly beneficial for outdoor events, lectures, or travel situations where charging facilities may not be readily available. The quick-charge technology allows for minimal downtime, ensuring that the device remains ready for use when needed.

The devices feature an intuitive LCD screen, enabling users to easily navigate menus and settings. The screen allows for playback, enabling quick reviews of footage without the need for additional equipment. Additionally, they support multiple recording formats, providing flexibility for various applications, from casual recording to more professional setups.

The SV-AV10 series also includes integrated editing features, enabling users to cut and trim their videos on-the-fly. This functionality is particularly appealing for content creators who need to produce quick edits or revisions while on the move. Moreover, the inclusion of built-in effects offers users creative options to enhance their recordings.

Connectivity options are another highlight. The SV-AV10 series supports USB connectivity, allowing users to easily transfer files to computers or other devices for editing and sharing. This seamless transfer makes it simple to archive important memories or create multimedia presentations.

The compact design of the SV-AV10 series, available in multiple colors such as silver and black, also makes them aesthetically pleasing. Their lightweight construction ensures that they won’t be a burden when traveling, appealing to users who value portability.

In conclusion, the Panasonic SV-AV10E, SV-AV10B, and SV-AV10EN are versatile, user-friendly multimedia devices. With their high-quality recording capabilities, long battery life, and integrated editing features, they are ideal for anyone looking to capture and produce high-quality audio and video content while on the go.