READ ALL INSTRUCTIONS

90546221 pc1800l pcl180l 1/5/09 12:34 PM Page 6

•Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.

•Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

•Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution.

•An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.

•Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.

•Do not mount charger on wall or permanently affix charger to any surface. The charger is intended to use on a flat, stable surface (i.e., table top, bench top).

•Do not operate charger with damaged cord or plug — have them replaced immediately.

•Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center.

•Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

•Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.

•NEVER attempt to connect 2 chargers together.

•The charger is designed to operate on standard household electrical power (120 Volts). Do not attempt to use it on any other voltage.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTION FOR BATTERY PACKS

WARNING: For safe operation, read this manual and manuals originally supplied with tool before using the charger.

The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow charging procedures outlined.

•Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned.

•Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.

•If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte for Li-ion batteries is composed of a mixture of liquid organic carbonates and lithium salts. For Ni-Cd batteries it is a 25-35% solution of potassium hydroxide.

•Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

6

Page 5 Page 7
Page 6
Image 6
Porter-Cable PC1800L, PCL180L, 90546221 instruction manual Important Safety Instruction for Battery Packs
Page 5 Page 7

PC1800L, PCL180L, 90546221 specifications

Porter-Cable has a strong reputation in the power tools industry, and the PCL180L, PC1800L, and 90546221 models showcase the brand’s commitment to quality and innovation. These tools are designed with features and technologies that meet the demands of both professionals and DIY enthusiasts.

The Porter-Cable PCL180L is a compact drill/driver that boasts a powerful 20V MAX Lithium-Ion battery, providing users with extended runtime and consistent power. One of its standout features is the high-performance motor, which delivers a torque of up to 400 in-lbs, enabling it to tackle a variety of drilling and fastening applications. The PCL180L is designed with a 1/2-inch keyless chuck that allows for quick and easy bit changes, enhancing productivity on the job site. Additionally, it incorporates a two-speed transmission, offering speeds of 0-350 RPM and 0-1500 RPM, making it versatile for different tasks.

The PC1800L complements the PCL180L with its robust design and functionality. This model is a cordless reciprocating saw equipped with a brushless motor that enhances efficiency and helps extend the tool’s lifespan. With its variable speed trigger, users have heightened control over cutting speed, allowing for precision in various materials such as wood, metal, and plastic. The tool’s lightweight design minimizes user fatigue, making it ideal for prolonged use. It also features a blade clamp that is compatible with a wide range of blades, ensuring versatility and adaptability to different projects.

The 90546221 is an essential accessory in the Porter-Cable lineup, as it provides replacement batteries specifically designed for the 20V MAX system. This Lithium-Ion battery is compatible with a broad range of Porter-Cable tools, thus expanding the usability and convenience factor for users. The battery includes a fuel gauge that allows users to easily check the remaining charge, ensuring they are never caught off guard during critical tasks.

All three models embody Porter-Cable’s commitment to reliability and efficiency, making them ideal choices for users seeking high-performance tools. Robust construction, ergonomic designs, and innovative technologies are hallmarks of these tools. Whether for professional applications or DIY projects, the PCL180L, PC1800L, and 90546221 deliver the performance and durability required to get the job done efficiently and effectively.
Top Page Image Contents