Panasonic PAJ- AJ- P Extender display, Shutter speed/mode display, 30.2-1/250 Synchro Scan

Status Displays Inside the Viewfinder Screen

1 Extender display

This is displayed when the lens extender is being used.

2 Shutter speed/mode display

This displays the shutter speed or shutter mode setting.

OFF:The shutter is not used.

1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000:

Shutter speeds (seconds) during standard mode.

1/30.2–1/250 (SYNCHRO SCAN):

Synchro scan mode is selected.

SUPER V:High vertical resolution mode is selected.

3 Remaining tape length display

This indicates the remaining tape length (minutes) for the VTR during recording.

	Remaining tape length display			Remaining tape length display
	(25 Mbps)			(50 Mbps)
	Display	Remaining tape		Display	Remaining tape
		length			length
	F–60	Full to 60 minutes		F–30	Full to 30 minutes
	60–55	60 to 55 minutes		30–25	30 to 25 minutes
	55–50	55 to 50 minutes		25–20	25 to 20 minutes
	50–45	50 to 45 minutes		20–15	20 to 15 minutes
	45–40	45 to 40 minutes		15–10	15 to 10 minutes
	40–35	40 to 35 minutes		10–5	10 to 5 minutes
	35–30	35 to 30 minutes		5–0	5 to 0 minutes
	30–25	30 to 25 minutes
	25–20	25 to 20 minutes
	20–15	20 to 15 minutes
	15–10	15 to 10 minutes
	10–5	10 to 5 minutes
			The “5–0” display flashes when there is
	5–0	5 to 0 minutes
			less than 3 minutes of tape remaining.
4 Remaining battery level display

5

6

7

When an Anton Bauer Digital Magnum Series battery is used to supply power to the unit, the remaining battery level is displayed numerically (%).

Filter display

This displays the type of filter selected.

White balance memory display

This displays the selected white balance automatic adjustment memory.

A:The WHITE BAL switch is set to A.

B:The WHITE BAL switch is set to B.

P:The WHITE BAL switch is set to PRST.

Gain value display

This displays the image amplifier gain setting (dB) set by the GAIN switch.

Note{

When using an Anton Bauer Digital Magnum Series battery, the remaining battery level display continues to display the level for the Anton Bauer battery even if power supply is switched to an external power source near the end of the battery’s power. However, note that the unit operates according to the external power source.

– 54 –