Setting Menu Screens
VF OPERATION Screen
This page performs the viewfinder display settings.
- V F OPERA T I ON -
¢ V F | OUT | : Y |
|
V F | DT L | : 2 |
|
Z EBRA 1 | DE T ECT : 0 | 7 0 | |
Z EBRA 2 | DE T ECT : 0 | 8 5 | |
Z EBRA 2 | : S POT | ||
Item | Variable | VF | Remarks | |
range | display | |||
|
| |||
|
|
|
| |
VF OUT | Y | ENG | VF OUT selection | |
| NAM |
| NAM (N Additive Mix): Signals with the | |
| R |
| highest level among R, G and B are | |
| G |
| output. | |
| B |
|
| |
|
|
|
| |
VF DTL | 0 | ENG | VF DTL selection | |
| . |
|
| |
| . |
| The detail of the VF signals is further | |
| . |
| ||
| 2 |
| boosted. At the “0” setting, the detail is | |
| . |
| ||
| . |
|
| |
| . |
| the same as the main line. | |
| 4 |
| ||
|
|
| ||
|
|
|
| |
ZEBRA1 | 50 | ENG | ZEBRA1 DETECT level (IRE value) | |
| . |
|
| |
DETECT | . |
| setting | |
. |
| |||
| 70 |
|
| |
| . |
|
| |
| . |
|
| |
| . |
|
| |
| 110 |
|
| |
|
|
|
| |
ZEBRA2 | 50 | ENG | ZEBRA2 DETECT level (IRE value) | |
| . |
|
| |
DETECT | . |
| setting | |
. |
| |||
| 85 |
|
| |
| . |
|
| |
| . |
|
| |
| . |
|
| |
| 110 |
|
| |
|
|
|
| |
ZEBRA2 | ON | ENG | ZEBRA2 ON/OFF switching and SPOT | |
| OFF |
| selection | |
| SPOT |
| FWhen ZEBRA2 is set to SPOT, set | |
|
|
| the ZEBRA2 DETECT value higher | |
|
|
| than the ZEBRA1 DETECT value. If | |
|
|
| the ZEBRA2 DETECT value is less | |
|
|
| than the ZEBRA1 DETECT value, the | |
|
|
| ZEBRA pattern will not be displayed. | |
|
|
|
|
LENS ADJ Screen
This page performs the lens adjustments. The ON/OFF status for each item is indicated by displaying an asterix (E) or period (.) in front of the item on the screen.
- L ENS AD J | - | ||
¢ . F 2 | . 8 | AD J | |
. F 1 | 6 | AD J |
|
E: ON
. : OFF
Item | Variable | VF | Remarks | |
range | display | |||
|
| |||
|
|
|
| |
F2.8 ADJ | ENG | Voltage is output only when selected | ||
|
| by the cursor (arrow). | ||
|
|
| ||
|
|
|
| |
F16 ADJ | ENG | Voltage is output only when selected | ||
|
| by the cursor (arrow). | ||
|
|
| ||
|
|
|
|
Note{
When using a lens which allows the lens iris open or close end to be adjusted, set either “F2.8 ADJ” or “F16 ADJ” to ON and repeatedly adjust the lens iris until it is “F2.8” or “F16”, respectively. (This adjustment need not be performed if the lens does not have this adjustment function.)
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the ENG menu.
