R E N O W N D E L U X E

5.CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less than R³/8 (³/8" B.S.P.). Connection is made to the Rc½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance.

Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig. 3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

Fig.3

All dimensions in mm

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

NOTE: ONLY LIQUID SEALANTS CAN BE USED IN THREADED GAS CONNECTIONS. DO NOT USE P.T.F.E. TAPE.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

6.FITTING THE BATTERY

1.The battery holder is located at the front left hand side of the bottom storage compartment (see Fig. 4).

2.Open bottom compartment flap to gain access to the battery holder.

3.From inside the bottom compartment, lift the battery holder lid and fit the 1.5 volt battery (see Fig.4) ensuring it is fitted as indicated by the symbols on the

battery holder.

Fig.4

4.After fitting battery close lid of holder.

7.PRESSURE TESTING

1.The oven injector is used as the pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide the burner off the injector whilst easing it towards the front of the appliance, taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner.

The pressure must be set to 28mbar for use on butane or 37mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

8.CHECKING THE GRILL

Remove the protective film from the grill pan shelf. Fit the grill pan shelf to the splashplate.

Place the grill pan containing the grid on to the grill pan shelf. Light the grill burner by turning the tap to its' full on position and pressing the ignition button. As soon as the burner is lit the button can be released.

If the ignition of the grill fails ensure the grill H.T wire is fitted to the grill electrode (see Section 2).

35

Page 33 Page 35
Page 34
Image 34
Electrolux 311330813 installation instructions Connecting to GAS, Fitting the Battery, Pressure Testing, Checking the Grill
Page 33 Page 35

311330813 specifications

The Electrolux 311330813 is a modern kitchen appliance designed to enhance cooking efficiency and convenience. This electric range stands out due to its combination of advanced technology, stylish design, and user-friendly features.

One of the main features of the Electrolux 311330813 is its dual fuel capability, which combines the best of both gas and electric cooking methods. The gas cooktop offers precise temperature control, with multiple burners that vary in size to accommodate various pot and pan dimensions. This flexibility allows users to simmer delicate sauces on low heat while achieving a rapid boil for pasta or vegetables on a larger burner.

The oven is powered by electricity, providing consistent heat distribution that ensures even cooking results. It features a convection cooking system that circulates hot air throughout the oven space, significantly reducing cooking times and promoting uniform browning. This technology is particularly beneficial for baking, roasting, and even broiling, making it a versatile choice for all culinary needs.

Another notable characteristic of the Electrolux 311330813 is its user-friendly interface. The appliance is equipped with a digital control panel that is intuitive and easy to navigate. With one-touch controls, users can effortlessly adjust cooking settings, timers, and ovens as required. Additionally, it features built-in Wi-Fi capabilities, allowing users to monitor and control their oven remotely through a smartphone application. This connectivity is ideal for those on the go, as it enables preheating and adjusting cooking temperatures from a distance.

Safety is also a priority with the Electrolux 311330813. It includes features such as a locking oven door and an automatic shut-off function to prevent accidents in the kitchen. Furthermore, its sleek stainless-steel design not only adds elegance to any kitchen but also ensures durability and ease of cleaning.

In summary, the Electrolux 311330813 is an outstanding electric range that harmonizes advanced cooking technologies with practicality and style. With its dual fuel capability, convection oven, user-friendly interface, and safety features, it serves as an excellent choice for both novice cooks and seasoned chefs looking to elevate their culinary experience. Whether preparing a simple weeknight dinner or an elaborate feast, this appliance stands ready to assist.
Top Page Image Contents