Wayne-Dalton 3222C, 3324B Alignment of Wired Infrared, Safety Sensors, Be Closed by Continuously

16	Alignment of Wired Infrared
		Safety Sensors
Tools Needed:
		WARNING
Pliers	TO AVOID POSSIBLE SEVERE OR FATAL
	INJURY, KEEP PEOPLE AND OBJECTS
	CLEAR OF THE MOVING DOOR ARM TO
	PREVENT POSSIBLE PERSONAL INJURY.

IMPORTANT: THE SAFETY SENSOR SENDS

AN INVISIBLE BEAM OF LIGHT FROM THE

SENDING UNIT TO THE RECEIVING UNIT

ACROSS THE PATHWAY OF THE DOOR. THE

OPENER WILL NOT OPERATE UNTIL THE

SAFETY SENSORS ARE CONNECTED TO THE

OPENER AND PROPERLY ALIGNED. IF THE

INVISIBLE BEAM OF LIGHT IS OBSTRUCTED,

AN OPEN DOOR CANNOT BE CLOSED BY

THE TRANSMITTER OR A MOMENTARY

ACTIVATION OF THE WALL STATION UP/

DOWN BUTTON. HOWEVER, THE DOOR MAY

BE CLOSED BY CONTINUOUSLY

HOLDING YOUR FINGER ON THE WALL

STATION UP/DOWN BUTTON (CONSTANT

PRESSURE) UNTIL THE DOOR TRAVELS TO A

FULLY CLOSED POSITION.

At this point you will be able to activate the opener. The trolley/ upper arm will move to the open position, but will not move to the closed position unless the beams are aligned.

The safety sensors must be aligned by moving the sending and receiving units in or out until the alignment light on the receiving unit comes on. The 1/4”-20 carriage bolt can be loosened to move the unit in or out, as required. If you have difficulty

aligning beams, check that both brackets are mounted at the same height (see Step 11) and remount if necessary. Additional minor adjustments can be made by lightly bending the mounting brackets.

Once the alignment light comes on, tighten all bolts and mounting screws.

Finish securing all wiring making sure not to break or open any of the conductors. Loop and secure any extra wire.

Using the wall station up/down button, activate the opener and check that it will operate through full open and close. Ensure trolley and trolley latch are in the closed position prior to proceeding to next step.

In			In
Out			Out
1/4”-20 Carriage Bolts
For this adjustment, bend mounting brackets
at wall mount
	Top View
Up/Down
Button
Wired Wall station
		ra	te
	e
	p		D
o	O		o
			o
			r
T	Press
	Here
Up/Down
Button
Multi-Function Wall Station
RF Transmitter

12Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com