Wayne-Dalton 3324B, 3322B-Z Power Connection, Permanent Wiring Option, To Avoid Electrical Shock

I			Power Connection
		(Permanent Wiring Option)
Tools Needed:
			WARNING
Needle Nose Pliers	TO AVOID ELECTRICAL SHOCK,
Pliers/Wire Cutters	DISCONNECT POWER AT THE FUSE/
	BREAKER BOX BEFORE PROCEEDING.
Flat Tip	IMPORTANT: CHECK YOUR LOCAL
Screwdriver	ELECTRICAL CODES. IF YOUR LOCAL CODE
	REQUIRES PERMANENT WIRING, USE THE
	SPECIFICATIONS CALLED FOR AND
	INSTRUCTIONS ILLUSTRATED.

Permanent Wiring Procedure

1.	Ensure power cord is disconnected from
	electrical power.
2.	Cut power cord 1/2” – 1” from strain
	relief/bushing.
3.	Use needle nose pliers to remove strain
	relief bushing from frame. Squeeze tabs in
	on underside of bushing and work bushing
	out of hole.
4.	Pull or strip off remaining section of outer
	insulation from power cord.
5.	Remove lens by pressing up on both sides
	of the bottom of the lens at the junction of
	the housing, releasing the locking tabs,
	and pulling forward; remove light bulb (if
	installed).
6.	Remove the housing from the chassis by
	removing the screw securing the
	housing to the chassis. Press on the
	locking tabs and slide the cover off the
	chassis.
7.	Pull the three wires into the opener;

Power Cord

1/2” To 1”

Strain Relief Bushing

Strain Relief

Bushing

Housing Tab

Opener

Lens

Tabs

	strip 1/2” of insulation from the black,
	white, and green wires.
8.	Using wire nuts for 14-18 AWG wire,
	connect the black wire to black wire, the
	white wire to white wire and the green
	wire to green wire. Make sure connections
	are secure.
9.	Replace opener cover.

Reconnect the power at the fuse/ breaker box, as soon as power is applied to the unit, the light on the opener will blink once to indicate a successful self check of the controls.

Chassis

Screw

Light Bulb

Tabs

Live & Neutral

Ground

Wire Nuts

20Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com