I
Tools Needed:
None
Programming Wireless Wall Station(s)
Or Transmitter(s) to Opener
WARNING
DURING PROGRAMMING THE GARAGE DOOR MAY OPERATE. KEEP PEOPLE AND OBJECTS CLEAR OF THE MOVING DOOR TO PREVENT DOOR DAMAGE OR POSSIBLE PERSONAL INJURY.
NOTE: Programming failure can occur if the wall station or transmitter is too close to the opener during the programming sequence. There must be a minimum of 6 feet between the wall station/ transmitter and the opener.
NOTE: The opener can be activated by up to 8 remote transmitters, 2 wall stations and 2 keyless entries. If a 9th remote is programmed the first remote programmed will be lost from memory. The same is true if a third wall station or a third keyless entry is programmed, the first will no longer be in memory and will not operate the opener.
NOTE: Do not press any button on the wall station or transmitter until instructed.
TRANSMITTER:
1.Press and release the PROGRAM button located on the garage door opener. The red PROGRAM STATUS light on the opener unit and the overhead lamp will turn on and remain lit for one minute, indicating activation of the learn mode.
2.Press one of the buttons on the transmitter you wish to use to operate the door. The PROGRAM STATUS light on the opener will turn on and off three times indicating a successful learn.
3.Press the same button on the transmitter once more to confirm operation. The opener will turn on and move the door.
At this point you will be able to activate the opener.
WALL STATION:
1.Press and release the PROGRAM button located on the garage door opener. The red PROGRAM STATUS light on the opener unit and the overhead lamp will turn on and remain lit for one minute, indicating activation of the learn mode.
2.Press the light on/off button on the wall station. The program status light will turn on and off three times indicating a successful learn.
3.Press the light on/off button on the wall station once more to confirm operation. The overhead light will toggle from on to off and from off to on.
At this point you will be able to activate the opener.
Right Side Of Opener
|
| Program Status |
|
| LED |
Program | PROGRAM | SW STATUS |
|
| |
Button |
|
|
|
| FORCE ADJ. |
Large Button 
Transmitter
Light
Button
|
|
| r |
|
|
| e at | ||
| p |
| e | |
o | O |
|
| D |
|
|
| ||
|
|
| o | |
T |
|
|
| o |
Pressr
Here
Wall Station
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need 33 You can reach us Toll Free at
