Firmware Pages and Descriptions

Battery Base Page Elements (Cont.)

Battery Status fields:

This section provides the ability to monitor the current battery charge level and

 

charge quality:

 

• The Battery One Charge Status bargraph indicates the power charge

 

available on the Slot 1 internal battery connection (bargraph range = 0 - 100).

 

• The Battery One Quality bargraph indicates the physical capacity (quality) of

 

the battery. Quality is the percentage of actual capacity vs. its rated capacity.

 

For optimal performance, a battery should be replaced when the quality

 

rating drops below 80%.

 

• The Base Version field indicates the firmware version being used by the

 

NXA-BASE/1 Battery Base connected to the NXT CV7 panel.

 

• The Battery Level Port field indicates the port being used to report the

 

charge status level back to the NetLinx Master on (set in TPD4).

 

• The Battery Level field indicates the level being used to report the charge

 

status level back to the NetLinx Master on (set in TPD4).

 

 

Battery Power Brightness

The DISABLE/DISABLED button acts as a power save feature with two

Limit:

available choices:

 

Disable - activates the brightness limit set on the Modero panel and is used

 

to conserve battery power. Activating this feature causes the panel to

 

function at 80% of full brightness and overrides the Panel Brightness value

 

set on the Setup page. This extends the battery usage time.

 

Disabled - (illuminated when selected) deactivates this power save feature

 

and makes the panel use the specified Panel Brightness level set on the

 

Setup page.

 

 

The term "quality" (in the context of a battery), refers to the current capacity relative to the batteries’ rated capacity. For example, after constant use, a battery may be operating at 75% of its rated capacity even though it might be fully charged. In this case, the battery could be incorrectly reporting its’ information back to the battery base and then consequently relating this information back to the Battery Base page. A battery can be recalibrated using an optional NXT-CHG (battery charger).

Protected Setup Navigation Buttons

The Protected Setup Navigation Buttons (FIG. 91) appear on the left of the panel screen when the Protected Setup page is currently active.

Modero Protected

Setup Navigation

Buttons

FIG. 91 Protected Setup Navigation Buttons

100

7" Modero Widescreen Touch Panels

Page 110
Image 110
AMX CV7 manual Protected Setup Navigation Buttons, Battery Status fields, Limit