CV7 Touch Panel Accessories

This upgrade kit requires that pre-existing panels first be removed from their current location (surface, wall or docking station) before an installer can access the internal circuit boards and upgrade a pre-existing 802.11b wireless CF card.

Only MVP panels require the use of a cardboard cutout (Mounting Template) to properly position the metal antenna plate onto the inner surface of the unit’s rear plastic housing

CV7 and CV10 panels only require locating the Compact Flash’s metal cover plate on the main circuit board and then adhering the terminal antenna connector to that location using the included double-sided adhesive tape.

If the CF metal cover plate is not present over the wireless card slot on a CV7 or CV10 panel, you can use the adhesive tape to secure the terminal antenna to the surface of the new card (atop the product label).

The procedures for upgrading a CF card on an MVP is identical for both MVP-7500 and MVP-8400 panels. The procedures for upgrading/installing the new CF card are also similar across all referenced NXT panels and NXD panels as a group (differences arise from their housing).

NXA-WC80211GCF Specifications

Dimensions (HWD):

• 0.22" x 1.68" x 2.40" (5.6 mm x 42.80 mm x 61.0 mm)

 

 

Weight:

• 19.50 grams (0.043 lbs)

 

 

Description:

• Wireless LAN Compact Flash Card with external PIFA antenna.

 

• Features enterprise-class security such as WPA and WPA2 security.

 

 

Features:

• Compact Flash Type I form factor

 

• Enhanced range and throughput

 

• Features wireless security such as: WPA, WPA2 and WEP

 

Field-installable

 

• Incorporates DSSS and OFDM radio technology

 

• Operates at ISM frequency bands of 2.4 GHz, while providing data transfer

 

speeds of up to 54Mbps.

 

• Support for IEEE 802.11b and 802.11g

 

• Supports Advanced Encryption Standard (AES) 64-bit and 128-bit data

 

encryption, along with an Re4 encryption cipher (64/128-bit)

 

• Supports authentication methods such as: EAP-FAST, EAP-LEAP, EAP-PEAP,

 

EAP-TLS, and EAP-TTLS

 

• Supports Wired Equivalent Privacy (WEP) 64-bit and 128-bit data encryption

 

(known to the on-board firmware as Static WEP)

 

 

Antenna Type:

• External PIFA antenna (factory-installed)

 

 

Bus Interface:

• Compact Flash Type I

 

 

Certifications:

• FCC Part 15 Class B, CE, IC, TELEC, and Wi-Fi

 

 

Media Access Control

• Using 802.11b DSSS communication:

Techniques:

DBPSK @ 1 Mbps

 

 

DQPSK @ 2 Mbps

 

CCK @ 5.5 Mbps

 

• Using 802.11g OFDM communication:

 

BPSK @ 6 and 9 Mbps

 

QPSK @ 12 and 18 Mbps

 

16-QAM @ 24 and 36 Mbps

 

64-QAM @ 48 and 54 Mbps

 

 

Network Architecture:

• Infrastructure mode (Client-to-Access Point)

 

 

16

7" Modero Widescreen Touch Panels

Page 26
Image 26
AMX CV7 manual NXA-WC80211GCF Specifications