AMX CV7 manual System Settings, Certificate Types Supported by the Modero Firmware

Firmware Pages and Descriptions

It is important to note which certificate types are supported by the different certificate fields used on the configuration screens (PEAP, TTLS, and TLS). The following table outlines the firmware fields and their supported certificate types.

Certificate Types Supported by the Modero Firmware

Configuration Field Name	Certificate File Type Supported
Certificate Authority field	PEM and DER
Client Certificate field	PEM and DER
Private Key field	.PEM, DER, and PKCS12

System Settings Page

The System Settings page (FIG. 112) sets the Secondary DNS Address information with its corresponding IP communication parameters, NetLinx Master communication settings, and reads the device number assigned to the Modero panel.

IP Settings section

Master Connection section (NetLinx Master properties)

Master Connection features do not take effect until the panel is rebooted

Red fields are user-editable

Blue fields cycle through choices

Grey fields are read-only

FIG. 112 System Settings page showing default values (reads and assigns values to the panel and Master)

The elements of the System Settings page are described in the table below:

System Settings Page Elements

Back:	Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).

132 7" Modero Widescreen Touch Panels