Firmware Pages and Descriptions

Volume Page Elements (Cont.)

Analog/Breakout Box:

Line In Level:Allows you to adjust the current Line-In volume level (being received from the communicating breakout box).

 

• Use the UP/DN buttons to adjust the Line-In volume level (range = 0 - 100).

 

• The Line-In Level bargraph indicates the current Line-In level.

 

• The Mute button mutes the Line-In volume.

 

 

Mic Out Level:

Allows you to adjust the current Microphone volume level (being received from

 

the communicating breakout box).

 

• Use the UP/DN buttons to adjust the Microphone volume level

 

(range = 0 - 100).

 

• The Mic Out Level bargraph indicates the current Mic Out level.

Supported sampling rates for WAV

The following is a listing of supported sampling rates associated for WAV files played on CV7 panels. Some WAV files currently played on Modero's may not work on these panels. The supported sampling rates for WAV files are:

Supported WAV Sampling Rates

• 48000 Hz

• 16000 Hz

 

 

• 44100 Hz

• 12000 Hz

 

 

• 32000 Hz

• 11025 Hz

 

 

• 24000 Hz

• 8000 Hz

 

 

• 22050 Hz

 

 

 

Protected Setup Page

This button opens the Protected Setup page which centers around the properties used by the panel to properly communicate with the NetLinx Master. Refer to both the Protected Setup Navigation Buttons section on page 100 and the Protected Setup Page section on page 97 for more detailed information.

Video Adjustment Page

The Video Setup page (FIG. 89) (accessed by pressing the Video Adjustment button on the Setup page) sets the Video properties of the incoming video signal from an NXA-AVB/ETHERNET Breakout Box.

Incoming Video signal

Once done making your screen adjustments, SAVE SETTINGS.

FIG. 89 Video Setup page (showing default values)

7" Modero Widescreen Touch Panels

97

 

 

Page 107
Image 107
AMX CV7 manual Supported sampling rates for WAV, Protected Setup, Video Adjustment, Supported WAV Sampling Rates