AMX CV7 manual Input Commands, Cal, Kps, Vks

Programming

Input Commands

These Send Commands are case insensitive.

Input Commands

^CAL	Syntax:
Put panel in	"'^CAL'"
calibration mode.	Example:
	SEND COMMAND Panel,"'^CAL'"
	Puts the panel in calibration mode.
^KPS	Syntax:
Set the	"'^KPS-<pass data>'"
keyboard	Variable:
passthru.
	pass data:
	<blank/empty> = Disables the keyboard.
	0 = Pass data to G4 application (default). This can be used with VPC or text areas.
	1 - 4 = Not used.
	5 = Sends out data to the Master.
	Example:
	SEND COMMAND Panel,"'^KPS-5'"
	Sets the keyboard passthru to the Master. Option 5 sends keystrokes directly to the
	Master via the Send Output String mechanism. This process sends a virtual keystroke
	command (^VKS) to the Master.
	Example 2:
	SEND COMMAND Panel,"'^KPS-0'"
	Disables the keyboard passthru to the Master.
	The following point defines how the parameters within this command work:
	• Accepts keystrokes from any of these sources: attached USB keyboard or Virtual
	keyboard.
^VKS	Key presses and key releases are not distinguished except in the case of CTRL, ALT, and
Send one or more	SHIFT.
virtual key strokes	Refer to theEmbedded Codes table on page 181 that define special characters which
to the G4	can be included with the string but may not be represented by the ASCII character set.
application.	Syntax:
	"'^VKS-<string>'"
	Variable:
	string = Only 1 string per command/only one stroke per command.
	Example:
	SEND COMMAND Panel,"'^VKS-'8"
	Sends out the keystroke 'backspace' to the G4 application.

180 7" Modero Widescreen Touch Panels