AMX CV7 manual Selected Firmware file

Upgrading Modero Firmware

Selected Firmware file Description field for selected Kit file

Firmware download status

Device and System values listed in the Workspace window

must match the System and Device values

FIG. 82 Send to NetLinx Device dialog (showing Modero firmware update via IP)

7.Select the panel’s Kit file from the Files section (FIG. 82).

8.Enter the Device value associated with the panel and the System number associated with the Master (listed in the OnLine Tree tab of the Workspace window). The Port field is greyed-out.

9.Click the Reboot Device checkbox. This causes the touch panel to reboot after the firmware update process is complete. The reboot of the panel can take up 30 seconds after the firmware process has finished.

10.Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog (FIG. 82).

11.Click Close (after the panel reboots) to return to the main program.

12.Right-click the associated System number and select Refresh System. This causes a refresh of all project systems, establishes a new connection to the Master, and populates the System list with devices on your particular system.

13.Confirm the panel has been properly updated to the correct firmware version.

88 7" Modero Widescreen Touch Panels