CV7 Specifications | AMX specs

Introduction

CV7 Specifications

The following table outlines the specifications for the 7" Widescreen Modero panels.

Specifications for 7" Widescreen Video Touch Panels

Dimensions (HWD):	• NXA-RK7: metal rack-mount with black matte finish:
	(4 RU - rack units high)
	6.97" x 19.0" x 0.50" (17.70 cm x 48.26 cm x 1.27 cm)
	• NXT-CV7 (Fully raised): 6.86" x 7.96" x 6.93"
	(17.40 cm x 20.20 cm x 17.60 cm)
	• NXT-CV7 (Fully lowered): 3.70" x 7.96" x 6.93"
	(9.40 cm x 20.20 cm x 17.60 cm)
	• NXD-CV7 (with faceplate): 5.93" x 7.87" x 3.28"
	(15.06 cm x 20.00 cm x 8.33 cm)
	• CB-TP7 Rough-In/Wallbox (optional): 5.47" x 7.23" x 3.40"
	(13.90 cm x 18.40 cm x 8.64 cm)

Power Requirements	• Constant current draw: 1.0 A @ 12 VDC (stand-alone)
(stand-alone CV7):	• Startup current draw: 1.5 A @ 12 VDC (stand-alone)
	• Startup current draw: 1.5 A @ 12 VDC (stand-alone)

Power Requirements	• Constant current draw: 2.4 A @ 12 VDC
(CV7 and BASE/1):	• Startup current draw: 3.6 A @ 12 VDC
	• Startup current draw: 3.6 A @ 12 VDC

Memory (factory default):	• 64 MB SDRAM
	• 64 MB Compact Flash (upgradeable to 1 GB - factory programmed)

Weight (stand-alone):	• NXD-CV7: 4.12 lbs (1.87 kg)
	• NXTCV7: 4.12 lbs (1.87 kg)

Certifications:	• FCC Part 15 Class B, CE, and EN 60950

Panel LCD Parameters:	• Aspect ratio: 16 x 9
	• Brightness (luminance): 350 cd/m2
	• Channel transparency: 8-bit Alpha blending
	• Contrast ratio: 200:1
	• Display colors: 256 thousand colors (18-bit color depth)
	• Dot/pixel pitch: 0.19 mm
	• Panel type: TFT Color Active-Matrix
	• Screen resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency
	• Video format: NTSC, PAL, and SECAM
	• Viewing angles (100° total viewing angle):
	Vertical: + 50° (up from center) and - 50° (down from center)

Active Screen Area:	• 6.00” x 3.60” (15.24cm x 9.14cm)

IR Reception Angle:	• Horizontal: + 50° (left and right from center)
	• Vertical: + 30° (up and down from center)

Supported Audio Sample	• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,
Rates:	11025Hz, and 8000Hz.

7" Modero Widescreen Touch Panels	3

Image 13

AMX manual CV7 Specifications, Specifications for 7 Widescreen Video Touch Panels

Contents

Modero CV7 AMX Limited Warranty and Disclaimer FCC Information Page Table of Contents Panel Calibration Upgrading Modero Firmware Programming 135 Appendix B Wireless Technology 197 Table of Contents Modero Widescreen Touch Panels FG2258-02K CV7 7 Widescreen Video Touch Panel KitsFG2258-01K NXT-CV7 Specifications for 7 Widescreen Video Touch Panels CV7 Specifications Front Panel Components Using USB with a Virtual Master section on page 53 for moreRear Panel Components Cont Included AccessoriesButton Assignments Operating / Storage USB CV7 Panels Connector Layout NXA-AVB/ETHERNET Specifications Product SpecificationsNXA-AVB/ETHERNET Breakout Box FG2254-10 Rear Components Installing the NXA-AVB/ETHERNETPanels only Audio In Right Channel Wiring the NXA-AVB/ETHERNET connectors and cables Wiring the NXA-AVB/ETHERNET for Balanced Audio Wiring the NXA-AVB/ETHERNET for Unbalanced Audio Connectors Modero Table Top Cable SpecificationsModero Table Top Cable CA2250-50 Modero Table Top Cable Wiring Table Wiring information for the Modero Table Top cableWire Connector Maximum Table Top Cable Lengths for Modero Panels Connector #1 Element #1 Binder Element #2 802.11b Wireless Interface Card Specifications NXA-WC80211B/CF 802.11b Wireless Card FG2255-03 NXA-WC80211GCF 802.11g Wireless Card FG2255-07 NXA-WC80211GCF Specifications Radio Technology InformationReceiver Sensitivity Standard Conformance Ieee 802.11b NXA-CFSP Compact Flash FG2116-3x Optional Compact Flash Upgrades Installation and Upgrade of the Internal NXT Components Before Upgrading the Wireless Card Read ThisRemove the existing NXT Outer Housing Do not Remove these screws Removal of the outer housing and wireless card location Install the Compact Flash Memory card upgrade Removing/installing a Compact Flash Memory card Install the new 802.11g CF Card and Antenna Close and Resecure the NXT Panel Enclosure Remove the existing NXD Outer Housing Installation and Upgrade of the Internal NXD Components Install the new 802.11g Wireless Compact Flash card NXD Install the new Compact Flash Memory card NXDClose and Resecure the NXD Panel Enclosure NXT-BP Specifications NXT-BP Power Pack FG2255-10Power Voltage NXA-BASE/1 Specifications NXA-BASE/1 Battery Base Kit FG2255-05KChecking the NXT-BP charge Installing the NXA-BASE/1 below an NXT-CV7 Panel Installing an NXT-BP into the NXA-BASE/1Front Back Charging the NXT-BP using the NXA-BASE/1 NXT-CHG Battery Charger Kit FG2255-50KPowering the NXT-CHG NXT-BP and NXT-CHG Specifications Charging the NXT-BP batteries using the NXT-CHG Reading the NXT-CHG LED IndicatorGreen Solid Recalibrating the batteries Installing the No-Button Trim Ring Installing the Internal ComponentsUnpacking the Panel CV7 Panel/enclosure Button latch Trim Ring Removing the No-Button Trim Ring Installing the Button Trim Ring Installer Leave a GAP Between the Stud and ROUGH-IN BOX Pre-Wall Installation of the Rough-In Box Installing the NXD panel within a Rough-In Box Installation of an NXD Touch Panel Faceplate/Trim Ring Default Faceplate comes with buttons Installing the NXD into drywall using Expansion Clips NXD-CV7 Wall Mount panel dimensions using expansion clips Installation Installing the NXD into a Flat Surface using #4 screws Along the edges Installation Preparing captive wires Wiring Guidelines for the CV7 PanelsWiring a power connection Ethernet/RJ-45 Port Connections and Wiring Audio/Video Port Connections and WiringPin Wire Color Function Polarity Audio/Video RJ-45 Pinout Information Ethernet RJ-45 Pinouts and Signals USB Port Connecting and Using Input DevicesPin Signals Connections Pairing Color Installation Modero Widescreen Touch Panels Calibrating the Modero Panel Panel Calibration Touch Panel Calibration Screens Testing your Calibration Modero Setup and System Connection Configuring Communication Modero connection information Setup the Panel and PC for USB Communication Configuring and Using USB with a Virtual MasterConfirm the Installation of the USB Driver on the PC To setting up a USB connection to the panel Device Manager dialog showing USB device Confirm and View the current AMX USB device connections Detection Icon Assigning Communication Settings for a Virtual Master IP Routing Wireless Settings Page Wireless Access Overview Hot Swapping Configuring a Wireless Connection Wireless communication using a Dhcp Address Configure the Panel’s Wireless IP Settings Using the Site Survey tool Wireless communication using a Static IP Address Site Survey Configure the Card’s Wireless Security Settings Required Information Configuring Communication 802.11b wireless card These WEP Key identifier values must match for both devices WEP Passphrase Keyboard Configure the Panel’s Wired IP Settings Configuring a Wired Ethernet Connection Information populating these fields is identical Configure an Ethernet Connection Type Choose a Master Connection Mode Setting Before beginning Ethernet Configuring Communication Resides on the same Subnet as itself G4 Web Control Using G4 Web Control to Interact with a G4 Panel Configuring Communication Using your NetLinx Master to control the G4 panel Web Control VNC installation and Password entry screens Configuring Communication Upgrading the Modero Firmware via the USB port Configure the panel for a USB Connection Type Prepare NetLinx Studio for communication via the USB port Default Modero panel value is Confirm and Upgrade the firmware via the USB port Using USB for a Virtual Master transfer Prepare the Master for communication via an IP Upgrading the Modero Firmware via Ethernet IP Address Prepare the panel for communication via an IP NetLinx Workspace window showing connected Modero panel Verify and Upgrade the panel firmware via an IP Selected Firmware file Setup Navigation Button Elements Setup Navigation Buttons Setup Page Elements Setup Timeout Display/Panel TimeoutConnection Status Inactivity Page Flip Project Information Page Elements Project Information Panel Information Page Elements Panel Information Time & Date Setup Time Date Refresh/Set Time & Date Setup Page ElementsTime Display fields Date Display fields Volume Page Elements VolumeMaster Volume Default Panel Sounds Video Adjustment Protected SetupSupported sampling rates for WAV Supported WAV Sampling Rates Video Setup Page Elements Battery Base Low Battery Warning Battery Base Page ElementsThis value can never exceed the Low Battery Warning value Charge Status Battery Status fields Protected Setup Navigation ButtonsSet on the Setup page. This extends the battery usage time Limit Protected Setup Navigation Button Elements Protected Setup Reboot Panel Protected Setup Page ElementsSystem Recovery Device Number G4 Web Control Protected Setup page-System Recovery confirmation dialog Remaining fields are configured G4 Web Control SettingsG4 Web Control Timeout G4 Web Control Page Elements Sensor Setup Page Elements Sensor Setup Light Sensor Dim Mode MinimumLight Level field Motion Sensor Wake Panel On Motion Sense Password Setup Page Elements Password SetupPanel Password Change Calibration Wireless Settings Wireless Settings Page Elements Wireless Security Support802.11b Wi-Fi CF card 802.11g Wi-Fi CF card Access Point MAC IP SettingsAddress Following fields are required Ssid and Password/Pass Phrase Wireless Security EAP-PEAP EAP-TTLS EAP-TLS EAP-LEAP Following fields are required SSID, Identity, and Password Site Survey PasswordRF Link Info Communication quality Wireless Settings Page Security Options Open Clear Text Wireless Settings Page Security Options OverviewWireless Security Open Clear Text Settings Save/Cancel Wireless Security Static WEP Settings Wireless Settings Page Security Options Static WEPWEP 64 / WEP Bit Key Size Default Key Wireless Security Static WEPWEP Keys Authentication Wireless Settings Page Security Options WPA-PSKCurrent Key Wireless Security WPA-PSK Settings Wireless Settings Page Security Options EAP-LEAPPassword/Pass Phrase Password Wireless Security EAP-LEAP SettingsIdentity EAP-LEAP sample Cisco System Security Wireless Settings Page Security Options EAP-FAST Anonymous Identity Wireless Security EAP-FAST Settings Been Disabled Disabled manualPAC File Location Wireless Settings Page Security Options EAP-PEAP EAP Security’s Using Server Certificates Overview Ssid Service Set Identifier Wireless Security EAP-PEAP Settings Wireless Security EAP-PEAP Wireless Settings Page Security Options EAP-TTLS Wireless Settings page EAP-TTLS security method Wireless Security EAP-TTLS Settings This field is optional and can be left blank MSCHAPv2 default because its the most common Wireless Security EAP-TLS Settings Wireless Settings Page Security Options EAP-TLS Client Certificate Private Key passwordPrivate Key Client Certificate Configuration Client certificate configurationCertificates and their Extensions Certificate Type Possible File Extensions System Settings Page Elements System SettingsCertificate Types Supported by the Modero Firmware Master Connection Full Duplex 134 Modero Widescreen Touch Panels Commands CommandsButton Assignments @APG @PDR @DPG@PHE @PHP Deactivate a Close all popups on Page1Deactivates the popup page ’Popup1’ on the Main Example Deactivates the popup page ’Popup1’ on the current @PPN @PPM@PPT @PPX @PSP @PSE@PST Ppog PpofPpon RGB triplets and names for basic 88 colors Programming NumbersRGB Values for all 88 Basic Colors Index No Name Red Green Blue 142 Modero Widescreen Touch Panels Font styles and ID numbers Default Font Styles and ID NumbersFont ID # Font type Size TPD4 Border Styles by Name Border stylesBorder styles Modero Widescreen Touch Panels 145 Button Commands Button CommandsANI APF Sendcommand Panel,BAU-520,1,00770062 Sendcommand Panel,BAT-520,1,Enter CityBAT BAT-vt addr range,button states range,new text BCF BCB BDO BCTBFB Entry is required BIMBLN BMC Sendcommand Panel,BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT BMF-vt addr range,button states range,data BMF BMF BML BMIBMP BNC BNT BNNBOP BOS BORBPP BSF BRDBSM BSO BVN BVLBVP BVT DPF CPFENA FON GIV GDIGLH GLL GRU GRDGSC GSN JSB ICOJSI MBT JSTPass data MDC TEF TECEffect names TXT Sendcommand TP,UNI-1,0,0041 Sendcommand Panel,UNI-500,1,0041UNI UNI-vt addr range,button states range,unicode text Text Effects Text Effect Names Defineevent Button Query Commands Custom Event Fields Button Query CommandsField Description ?BCB ?BCT ?BCF ?BOP ?BMP ?BWW ?BRD ?ICO ?FON ?JSI ?JSB ?TEC ?JST Send Command Panel,?TXT-529,1 Send Command Panel,?TEF-529,1?TEF ?TEF-vt addr range,button states range Panel Runtime Operations Panel Runtime Operation Commands @AKR @AKPBeep Brit @EKP SetupPkeyp @PKP @TKP @SOUTpageon Tpageoff Input Commands Input CommandsCAL KPS Embedded Codes Embedded codesDecimal numbers Hexidecimal values Virtual keystroke Panel Setup Commands Panel Setup Commands Dynamic Image Commands Dynamic Image Commands RAF-resource name,data Troubleshooting Information My Battery Base page doesn’t Symptom Solution Updated my panel firmware butMy NXT-BP battery pack is Life indicator Connecting Symptom SolutionWas using the power from PSN When I connected my NXA-BASE/1 connected to a pow My battery from within anEred panel My WEP doesn’t seem to be Only one shows up Connected to my System MasterAfter downloading a panel file or Behaves strangely Troubleshooting 190 Modero Widescreen Touch Panels Bargraph Text Code Inputs Text Formatting Codes for Bargraphs/JoysticksFormatting Code Operations Example Input mask character types Text Area Input MaskingCharacter Types Character Masking Rule Input mask next field characters Input mask rangesInput mask operations Input mask literals Output Examples Input mask output examplesCommon Name Input Mask Special escape sequences URL ResourcesEscape Sequences Sequence Panel Information Appendix a 196 Modero Widescreen Touch Panels Overview of Wireless Technology Appendix B Wireless Technology 802.1x Terminology Tkip WPA2 EAP characteristics EAP AuthenticationEAP Method Characteristics Method Credential Type Authentication Pros Cons EAP security method in process EAP communication overview AMX Certificate Upload Utility Configuring your G4 Touch Panel for USB Communication 204 Modero Touch Panels How to Upload a Certificate File 206 Modero Touch Panels Appendix B Wireless Technology Modero Touch Panels 207 Appendix B Wireless Technology 208 Modero Touch Panels Appendix Modero Widescreen Touch Panels 209 It’s Your World Take Control