AMX CV7 manual G4 Web Control, Protected Setup page-System Recovery confirmation dialog

Firmware Pages and Descriptions

You have a wait time of 5 seconds before the YES option is enabled.

FIG. 93 Protected Setup page-System Recovery confirmation dialog

Channel Port

Channel Port		Channel Code
		Number
	3,132			Address
Level Port	Button			Port	Level Port
	2,8		3,50		Channel Code
Channel Code
				Address Code	Number
Number
				Number
FIG. 94 Button/slider Function Show example

G4 Web Control Page

7,10

Slider

4,9 1,8

Channel Code Number

Address

Port

Address Code Number

The G4 Web Control page (FIG. 95) centers around enabling and disabling both the display and control of your panel (via the web). An external PC running a VNC client (installed during the initial communication to the G4 panel) makes this possible.

FIG. 95 G4 Web Control page

Each panel supports the open standard Virtual Network Computing (VNC) interface. These panels contain a VNC server that allows them to accept a connection from any other device running a VNC client. Once a connection is established to that target device, the client can control the touch panel remotely.

7" Modero Widescreen Touch Panels 103