CV7 Touch Panel Accessories

The NXT-CHG Smart Battery Charger uses an included power supply to charge inserted batteries.

1.Connect the rear of the NXT-CHG to the power adapter.

2.Connect the power adapter to the provided power cord (with plug).

3.Provide power to the unit by connecting the power cord (with plug) into a power outlet that meets the requirements outlined in the Specifications section for the NXT-CHG.

Reading the NXT-CHG LED Indicator

FIG. 31 shows the components on the NXT-CHG Smart Battery Charger.

Slot 1 (recalibration)

Slot 2

Slot 1

LED

Slot 2

LED

Recalibrate

Pushbutton

FIG. 31 Component locations on the NXT-CHG

There is one LED indicator on the front of each battery slot that indicates the status of that slot. The blink patterns for these LEDs are described in the following table:

Off:

No battery detected.

Green Flashing: Fast charging.

Green Solid:

Fully charged.

Yellow Flashing: Recalibration in process.

Yellow/Green: Recalibration complete.

Yellow Solid: Standby (waiting for other battery to charge).

Red Flash: Error (problem with either the battery connection to the internal slot, or with the battery itself).

Charging the NXT-BP batteries using the NXT-CHG

1.Review the Checking the NXT-BP charge section on page 27 to confirm the percentage of charge remaining on the batteries.

2.Provide power to the charger (as outlined in the Powering the NXT-CHGsection on page 30).

3.Align the battery connector with the corresponding charge slot.

4.Firmly insert the battery into the desired slot until the battery is both securely located within the slot and there is activity from the corresponding Slot LED. Refer to the Reading the NXT-CHG LED Indicator section on page 31 section for LED information.

7" Modero Widescreen Touch Panels

31

 

 

Page 41
Image 41
AMX CV7 manual Reading the NXT-CHG LED Indicator, Charging the NXT-BP batteries using the NXT-CHG, Green Solid