Recording Pictures supplied from an external device
1Turn the SD Video Camera off and put in the USB Cradle. (l 10)
2Connect the [AV IN/OUT] terminal of the USB Cradle to the AV Output Sockets of the external device 2 using supplied AV Cable
1.
3Turn on the SD Video Camera and set the
Record/Play mode Switch to [ 
] and then, set the operation mode to [PICTURE] or [MPEG4].
4Press the [MENU] Button and then, select [Setup] and press the Jog Ball.
5Set [Input select] to [Line] and press the [MENU] Button.
≥The [ 
] indication appears.
6Select desired image quality. (l 22, 24)
7Press the [MENU] Button.
8Set up the external device.
≥Confirm that the image or sound signal is input into the SD Video Camera.
≥In the [MPEG4] mode, when rotating the Zoom Lever to [W], you can mute the sound from the speaker. (The volume of the sound cannot be changed. You can output the sound again when rotating the Zoom Lever to [T].)
9Press the Recording Start/Stop Button.
≥Recording starts.
≥When the moving picture is being recorded, press the Recording Start/Stop Button again to stop recording.
≥While this camera can record audio from an external device, the audio connection should only be connected to the “line” output of the external device. This is normally an “RCA” type of connector. Do not attempt to connect audio directly from the speaker output of any device. Doing so will cause serious damage to this device.
DC IN 4.8V 
AV IN/OUT 2
1
| 2 |
3 | MODE |
4 Ô
MENU 
5,6 Ô | × | ||
MENU | |||
|
| ||
| × |
| |
| 5672 |
| |
| $GGR | 1HH | |
| +PRWVUGNGEV | .KPG | |
| #WVQRQYGTQP | 1HH | |
7 | MENU |
| |
9 |
|
| |
40