Panasonic SV-AV50 Inserting a Memory Card l, Using the LCD Monitor l, Using the Menu Screen l

Page 58

≥When removing the battery, take care not to drop it.

≥When the SD Video Camera is turned on, do not attach or remove the battery, or plug the power cord in or out.

ªInserting a Memory Card (l 12)

≥While the Power/Card Access Lamp is on, the following operations should not be attempted: (Such action will damage the Memory Card, cause loss of recorded data and cause the SD Video Camera to malfunction.)

-Remove or insert the Memory Card.

-Remove the battery or unplug the power cable.

-Apply vibration or shock.

≥An SD Memory Card can be used for this SD Video Camera.

≥Do not touch the terminals on the back of the Memory Card with your fingers.

≥Electrical noise, static electricity or failure of the SD Video Camera or the Memory Card may damage the Memory Card or erase the data stored on the Memory Card. It is recommended to save important data onto a personal computer.

≥Some cards may pop out when they are removed.

ªUsing the LCD Monitor (l 13)

≥About portrait recording: -Record the subject approx.1.7 ft. (50 cm)

away from it.

-Only operates with Zoom function.

-Only the indication which is limited appears

on screen display.

-Menu screen will not appear.

ªUsing the Menu Screen (l 17)

≥To abort the setting, press the [MENU] Button.

≥While a Menu is displayed, you cannot record or play back.

≥The menu screen does not appear during recording.

ªSetting Date and Time (l 20)

≥The built-in battery sustains the operation of the clock.

≥The clock might cause a deviation from the correct date and/or time, so be sure to check the current date and/or time before recording.

≥If the [PRESS MENU TO SET CLOCK] indicator is displayed, set the date and time after the battery has charged. (l 51)

ªRecording Still Pictures (l 22)

≥The larger the target still pictures are, the longer the time is required for recording to the Memory Card.

≥If [Normal] is selected for recording, mosaic-pattern noise may appear on a playback image depending on the image content.

≥The available range of the Flash is approximately 2 to 3.3 ft. (60 to 100 cm) in a dark place.

≥Record the subject approx.1.7 ft. (50 cm) away from it.

≥Digital zooming degrades the picture quality.

≥If the number of remaining recordable pictures is 10,000 or more, the indication will be “9999”.

flashes immediately after the Flash is

used to indicate that pictures cannot be recorded. Wait until it stops flashing.

≥As the magnification of Zoom increases, the quality of image may deteriorate.

58

Image 58
Contents Model No. SV-AV50 End User License Agreement Contents Selección de los modos Information for Your SafetyColocación en el Soporte USB Dear CustomerPage Any changes or modifications not expressly approved by Core when connecting to computer or peripheral devicesFCC Note U.S. only To operate this equipmentClock setting IntroductionStandard Accessories Optional AccessoryControls and Components 24 23Using AC Adaptor Using the USB CradlePower Supply Place the SD Video Camera on the USB CradleWait until Power/Card Access Lamp 1 goes off Charging the BatteryRemoving the Battery Close and lock the Card/Battery Door while sliding itInserting a Memory Card Removing the Memory CardOpen the LCD Monitor Using the LCD MonitorUse mainly when recording To the desired recording/playing angleRecording Still Pictures skillfully Using the Jog BallªAttaching the Lens Protection Sticker Attach the Lens Protection Sticker 1 toTurning the power off Turning the Power OnªAuto power on mode Press the Í Button for 1 second or MoreSelecting Operation Modes Record modePlay mode About the Operation Modes≥The menu in the selected mode is displayed Using the Menu ScreenSelect a desired mode. l Press the Menu Button Sub-Menu for Record Mode Record ModeList of Menus Play Mode Setting Date and Time LCD Brightness Brightness Adjusting Brightness Color Level on the LCD Monitor≥These adjustments do not affect the recorded images ≥If Brightness is selected, the brightness can beSet Quality to desired picture quality Recording Still PicturesTo Check the Recorded Image Immediately To use the flash, Set Flash to Flash on or AutoTo Play Back All of the Still Pictures One by One Playing Back Still PicturesOperation during Playback ªTo Double the Image SizeRecording Moving Pictures MPEG4 You can record moving pictures on the Memory CardTo Change the Display Size Playing Back Moving Pictures MPEG4For Repeat Playback You can record voice data on the Memory Card Voice Recording Voice Recording Function≥Recording starts Stop Plays back the voice files recorded by the SD Video CameraReverts to the file list ªTo Repeat Playback Listening to Music Audio PlaybackOperation during playing Roll the Jog Ball to select a desired fileªSelecting a Playlist Adjusting the VolumeRotate the Zoom/Volume Lever toward T Or W Selecting a desired Sound QualityFiles Using the Remote Controller/ EarphonesOperating the Remote Controller Selects the previous file orDigital Zoom Function Night View FunctionBacklight Compensation Function ≥The editing menu screen appearsAdjusting White Balance To Erase All Files ≥Erased files cannot be restoredErasing the Files Recorded on a Memory Card Select Yes and press the Jog BallTo Lock All Files Protecting Files File ProtectionTo Release the File Protection Select Unlock in aboveTo Release All the Dpof Settings Writing Printing Data on a Memory Card Dpof SettingTo Check the Dpof Settings in Slide Show ªCreating P. Slide Show Data with SD-MovieStage Ver.2.5 Playing Back Still Pictures One by One P. Slide Show≥P. Slide show starts ≥Pictures set with SD-MovieStage are Formatting the Memory Card Select Yes and press the Jog Ball to be formattedMenu Button ≥Turn off the SD Video Camera before connecting AV CablePlaying Back on an external device Select the file to be played back Press the Jog BallTurn the SD Video Camera off and put in the USB Cradle. l ≥The indication appearsConnect the SD Video Camera with External device. l Using Auto Recording FunctionSelect Auto record standby and press Jog Ball About the supplied software About the supplied softwarePage SD-MovieStage Features of SD-MovieStage Ver.2.5USB Driver System Requirements for USB DriverSystem Requirements for SD-Jukebox Ver.4 Features of SD-Jukebox Ver.4SD-Jukebox Compatible with the Creative Sound Blaster 16 and speakersClick USB Driver Installing USB DriverInstalling SD-MovieStage Ver.2.5 Click FinishPersonal computer’s CD-ROM drive Installing SD-Jukebox Ver.4Insert the supplied CD-ROM into Click SD-Jukebox Ver.4Place the SD Video Camera on the USB Connecting to the PC≥Connect the USB cable after the USB driver is installed ≥The SD Video Camera works as a personalStarting the Software Disconnecting the USB Cable SafelyIf you no longer need software Uninstall ªStarting the SD-MovieStage Ver.2.5This folder are recorded in the Jpeg Accessory are storedImages IMGA0001.JPG etc. Format -0001 or similarOthers After UseIndications Camera Functions Please connect both AC adapter and batterySet to Play mode Date/Time Indication l Elapsed time indication 0h00m00sAbout the SD Video Camera About using this unitAbout the AC Adaptor About the Battery CondensationAbout the Lens State of Power Lamp while ChargingAbout the LCD Monitor About the Memory CardTurning off Charging the Battery lCharging is completed Setting Date and Time l Using the LCD Monitor lUsing the Menu Screen l Inserting a Memory Card lRecording Moving Pictures MPEG4 l Playing Back Still Pictures lTimes listed in the above table are approximate Listening to Voice Recordings Voice Playback l Playing Back Moving Pictures MPEG4 lVoice Recording Voice Recording Function Listening to Music Audio Playback lNight View Function l Adjusting the Volume lAdjusting White Balance l Backlight Compensation Function lPlaying Back Still Pictures One By One P. Slide Show l Writing Printing Data on a Memory Card Dpof SettingProtecting Files File Protection Formatting the Memory CardPlaying Back on an external Device l Recording Pictures supplied from An external device lInstalling SD-MovieStage Ver.2.5 Using Auto Recording FunctionConnecting to the PC l 3Insert the supplied CD-ROM into the CD-ROM drive 1Click Next5Click Next 6Click Next 7Click Finish SD Video Camera power shuts off automatically Before Requesting ServicePower SD Video Camera power cannot be turned on SD Video Camera power does not stay on long enoughInstructions drastically Playback Recorded still pictures are not clearPlayback images do not look Normal An k Indication or a black screen is displayedRemoval warning appears When the USB cable is connected, aRed, blue, green or white dots appear on the screen Jog Ball or others cannot be ActivatedSpecifications SD Video CameraCarry-In or Mail-In Service Limited Warranty For U.S.A. OnlyLimited Warranty Coverage Panasonic SD ProductsLimited Warranty Limits And Exclusions Customer Services Directory For U.S.A Only Index Utilización del adaptador CA Colocación en el Soporte USBAlimentación eléctrica Colocar la Videocámara SD en el soporte USBCarga de la batería ≥Confirmar la dirección de la bateríaCerrar y bloquear el compartimiento de Inserción de la Tarjeta de memoriaSelección de los modos de funcionamiento Tarjeta/Batería deslizando la tapaGrabación de Imágenes Fijas/ 1 Imágenes en Movimiento/Voz ≥Durante la grabación en el modo deseadoPage Page Panasonic Canada Inc