Panasonic SV-AV50 About the SD Video Camera, About using this unit, About the AC Adaptor

Page 54

Cautions for Use

ªAbout the SD Video Camera

Keep this unit away from magnetized equipment (such as a microwave oven, TV, video game equipment, etc.).

≥If you use this unit on or near a TV, images and sounds may be disturbed due to

electromagnetic wave radiation.

≥Do not use near a cell phone because doing so may cause noise to adversely affect the picture and sound.

≥Recorded data may be damaged, or images may be distorted by strong magnetic fields created by speakers or large motors.

≥Electromagnetic wave radiation generated by a digital circuit (including a microprocessor) may adversely affect this unit, causing the disturbance of images and sounds.

≥If this unit is affected by magnetically charged equipment and does not function properly, turn the power off and detach the battery and then connect it again.

Thereafter, turn the power on.

Do not use this unit near radio transmitters or high-voltage lines.

≥If you record near radio transmitters or high-voltage lines, recorded images or sounds may be adversely affected.

Do not spray insecticides or volatile chemicals onto this unit.

≥If this unit is sprayed with such chemicals,

the camera body may be damaged and the surface finish may peel off.

≥Do not keep rubber or plastic products in contact with this unit for a long period of time.

When you use this unit on a beach or similar place, do not let sand or fine dust get into the camera.

Do not wet this unit with seawater or other liquid.

≥Sand or dust may damage this unit. The lens may be scratched, fogged or other damages may be caused.

54

≥If the unit is accidentally drenched with seawater, rain or droplets, wipe with a well wrung cloth, and then wipe with a dry

cloth.

When carrying this unit, take care not to drop or hit it.

Do not carry this unit in a pocket.

≥The outer case may be destroyed by the strong shock, and it may cause malfunction of this unit. Store this unit in the carrying case (supplied).

Do not use benzine, thinner or alcohol for cleaning this unit.

≥Detach the battery before cleaning this unit.

≥The camera body may be deformed and the surface finish may peel off.

≥Wipe this unit with a soft, dry cloth. To remove stubborn stains, wipe with a cloth that is soaked in a detergent diluted with water and afterward finish wiping with a soft, dry cloth.

≥When you use a chemical cloth, read the instructions of the cloth.

≥Wipe the stains on the lens and the LCD monitor with the cleaning cloth (supplied).

Do not place the AC Adaptor and the battery of this unit in any place (especially under the blazing sun or inside a car in the summer) where they will be subjected to high temperatures. ≥High temperatures under conditions noted

above may cause leakage, heat generation, fire or explosion of the battery.

ªAbout using this unit

After long operation, this device can get warm. This is not a malfunction.

≥Turn on and operate the SD Video Camera every 6 months even if you do not have plans to use it.

ªAbout the AC Adaptor

≥Be sure to use supplied AC Adaptor.

≥If you use the AC adaptor near a radio (especially when you are tuning in AM stations), radio reception may be disturbed. Keep the AC adaptor 1 meter or more away from radio.

Image 54
Contents Model No. SV-AV50 End User License Agreement Contents Selección de los modos Information for Your SafetyColocación en el Soporte USB Dear CustomerPage Any changes or modifications not expressly approved by Core when connecting to computer or peripheral devicesFCC Note U.S. only To operate this equipmentClock setting IntroductionStandard Accessories Optional AccessoryControls and Components 24 23Using AC Adaptor Using the USB CradlePower Supply Place the SD Video Camera on the USB CradleWait until Power/Card Access Lamp 1 goes off Charging the BatteryRemoving the Battery Close and lock the Card/Battery Door while sliding itInserting a Memory Card Removing the Memory CardOpen the LCD Monitor Using the LCD MonitorUse mainly when recording To the desired recording/playing angleRecording Still Pictures skillfully Using the Jog BallªAttaching the Lens Protection Sticker Attach the Lens Protection Sticker 1 toTurning the power off Turning the Power OnªAuto power on mode Press the Í Button for 1 second or MoreSelecting Operation Modes Record modePlay mode About the Operation ModesUsing the Menu Screen ≥The menu in the selected mode is displayedSelect a desired mode. l Press the Menu Button Record Mode Sub-Menu for Record ModeList of Menus Play Mode Setting Date and Time LCD Brightness Brightness Adjusting Brightness Color Level on the LCD Monitor≥These adjustments do not affect the recorded images ≥If Brightness is selected, the brightness can beSet Quality to desired picture quality Recording Still PicturesTo Check the Recorded Image Immediately To use the flash, Set Flash to Flash on or AutoTo Play Back All of the Still Pictures One by One Playing Back Still PicturesOperation during Playback ªTo Double the Image SizeRecording Moving Pictures MPEG4 You can record moving pictures on the Memory CardPlaying Back Moving Pictures MPEG4 To Change the Display SizeFor Repeat Playback Voice Recording Voice Recording Function You can record voice data on the Memory Card≥Recording starts Plays back the voice files recorded by the SD Video Camera StopReverts to the file list ªTo Repeat Playback Listening to Music Audio PlaybackOperation during playing Roll the Jog Ball to select a desired fileªSelecting a Playlist Adjusting the VolumeRotate the Zoom/Volume Lever toward T Or W Selecting a desired Sound QualityFiles Using the Remote Controller/ EarphonesOperating the Remote Controller Selects the previous file orDigital Zoom Function Night View FunctionBacklight Compensation Function ≥The editing menu screen appearsAdjusting White Balance To Erase All Files ≥Erased files cannot be restoredErasing the Files Recorded on a Memory Card Select Yes and press the Jog BallTo Lock All Files Protecting Files File ProtectionTo Release the File Protection Select Unlock in aboveWriting Printing Data on a Memory Card Dpof Setting To Release All the Dpof SettingsTo Check the Dpof Settings in Slide Show Playing Back Still Pictures One by One P. Slide Show ªCreating P. Slide Show Data with SD-MovieStage Ver.2.5≥P. Slide show starts ≥Pictures set with SD-MovieStage are Formatting the Memory Card Select Yes and press the Jog Ball to be formattedMenu Button ≥Turn off the SD Video Camera before connecting AV CablePlaying Back on an external device Select the file to be played back Press the Jog BallTurn the SD Video Camera off and put in the USB Cradle. l ≥The indication appearsUsing Auto Recording Function Connect the SD Video Camera with External device. lSelect Auto record standby and press Jog Ball About the supplied software About the supplied softwarePage SD-MovieStage Features of SD-MovieStage Ver.2.5USB Driver System Requirements for USB DriverSystem Requirements for SD-Jukebox Ver.4 Features of SD-Jukebox Ver.4SD-Jukebox Compatible with the Creative Sound Blaster 16 and speakersClick USB Driver Installing USB DriverInstalling SD-MovieStage Ver.2.5 Click FinishPersonal computer’s CD-ROM drive Installing SD-Jukebox Ver.4Insert the supplied CD-ROM into Click SD-Jukebox Ver.4Place the SD Video Camera on the USB Connecting to the PC≥Connect the USB cable after the USB driver is installed ≥The SD Video Camera works as a personalStarting the Software Disconnecting the USB Cable SafelyIf you no longer need software Uninstall ªStarting the SD-MovieStage Ver.2.5This folder are recorded in the Jpeg Accessory are storedImages IMGA0001.JPG etc. Format -0001 or similarOthers After UseIndications Camera Functions Please connect both AC adapter and batterySet to Play mode Date/Time Indication l Elapsed time indication 0h00m00sAbout using this unit About the SD Video CameraAbout the AC Adaptor About the Battery CondensationAbout the Lens State of Power Lamp while ChargingAbout the LCD Monitor About the Memory CardCharging the Battery l Turning offCharging is completed Setting Date and Time l Using the LCD Monitor lUsing the Menu Screen l Inserting a Memory Card lPlaying Back Still Pictures l Recording Moving Pictures MPEG4 lTimes listed in the above table are approximate Listening to Voice Recordings Voice Playback l Playing Back Moving Pictures MPEG4 lVoice Recording Voice Recording Function Listening to Music Audio Playback lNight View Function l Adjusting the Volume lAdjusting White Balance l Backlight Compensation Function lPlaying Back Still Pictures One By One P. Slide Show l Writing Printing Data on a Memory Card Dpof SettingProtecting Files File Protection Formatting the Memory CardPlaying Back on an external Device l Recording Pictures supplied from An external device lUsing Auto Recording Function Installing SD-MovieStage Ver.2.5Connecting to the PC l 1Click Next 3Insert the supplied CD-ROM into the CD-ROM drive5Click Next 6Click Next 7Click Finish SD Video Camera power shuts off automatically Before Requesting ServicePower SD Video Camera power cannot be turned on SD Video Camera power does not stay on long enoughInstructions drastically Playback Recorded still pictures are not clearPlayback images do not look Normal An k Indication or a black screen is displayedRemoval warning appears When the USB cable is connected, aRed, blue, green or white dots appear on the screen Jog Ball or others cannot be ActivatedSpecifications SD Video CameraCarry-In or Mail-In Service Limited Warranty For U.S.A. OnlyLimited Warranty Coverage Panasonic SD ProductsLimited Warranty Limits And Exclusions Customer Services Directory For U.S.A Only Index Utilización del adaptador CA Colocación en el Soporte USBAlimentación eléctrica Colocar la Videocámara SD en el soporte USBCarga de la batería ≥Confirmar la dirección de la bateríaCerrar y bloquear el compartimiento de Inserción de la Tarjeta de memoriaSelección de los modos de funcionamiento Tarjeta/Batería deslizando la tapaGrabación de Imágenes Fijas/ 1 Imágenes en Movimiento/Voz ≥Durante la grabación en el modo deseadoPage Page Panasonic Canada Inc