ªAbout the LCD Monitor
≥In a place with drastic temperature changes, condensation may form on the
LCD monitor. Wipe it with the cleaning cloth (supplied).
≥Do not push the LCD monitor forcefully. It may cause unevenness and malfunctions to the monitor.
≥When the lens is aimed at a subject with high contrast, the picture may look uneven or after images may appear on the LCD monitor. This is not a malfunction.
≥If this unit is extremely cold when you turn the power on, the image on the LCD monitor is slightly darker than usual at first. However, as the internal temperature increases, it goes back to the normal brightness.
Extremely high precision technology is employed to produce the LCD Monitor screen featuring a total of approximately 117,600 pixels. The result is more than 99.99% effective pixels with a mere 0.01% of the pixels inactive or always lit. However, this is not a malfunction and does not affect the recorded picture.
ªAbout the Lens
≥Do not touch the lens. Wipe the SD Video Camera with the cleaning cloth (supplied) when the lens becomes unclean. Do not wipe stains on the lens with sharp objects. The lens may be scratched or broken. ≥When the Lens is Fogged Up, turn off the SD Video Camera and leave the SD Video
Camera in this condition for approx.
1 hour. When the lens temperature becomes close to the ambient temperature, the fog disappears naturally.
ªAbout the Memory Card
When the power/card access lamp is Blinking (when the card is being read), do not remove the card, turn the power off, or subject it to vibration or impact. Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated. Do not bend, drop, or subject it to strong vibration.
≥If the above precautions are not taken, the card or the recorded content may be damaged.
Be sure to pull out and store the card after use.
≥Keep the card in the storage bag to store or carry the card around.
≥Do not allow dirt, dust or water to enter the terminals on the back of the card. Do not touch it with your fingers.
≥The SD Memory Card has a
≥As a result of improper operations, recorded data may be damaged or erased. We are not responsible for the loss caused by the erasure of the recording data.
ªState of Power Lamp while
charging
The Power Lamp flashes while charging. (Flashes approx. every 4 seconds when charging is normal (flashes on approx.
2 seconds and off approx. 2 seconds).) When the Power Lamps flashes more quickly or slowly (or turns off), some abnormality may have occurred.
The flashing speed suggests the following states.
56