Precautions
Refer to all work related to the installation of this product to qualified service person- nel or system installer.
Do not attempt to disassemble the prod- uct.
There are no serviceable parts inside. Contact the qualified service personnel for maintenance.
Use this appliance for indoor use only.
Do not expose the appliance to direct sun- light for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discol- oration and malfunction. Keep the appliance away from water and moisture.
To keep on using with stable performance
•Parts of this product may deteriorate and it may shorten lifetime of this product when using in locations subject to high temperatures and high humidity. Do not expose the product to direct heat such from a heater.
•Use the appliance at temperature within +5 °C - +35 °C (41 °F - 95 °F) and humidity below 90 %. (when using the appliance without turning the power off)
Handle the appliance with care.
Do not strike or shake, as this may damage the appliance. It may cause a malfunction.
About the PC monitor
When displaying the same image on the PC monitor at length, the PC monitor may be damaged. It is recommended to use a
When an error is detected, the camera will restart automatically.
This camera will restart when detecting an error caused by any reason. The camera will be inoperable for around 30 seconds after
the restart just as when the power is turned on.
Cleaning the camera body
Turn the power off when cleaning of the cam- era. Use a dry cloth to clean the camera. When the dirt is hard to remove, use a mild detergent and wipe gently. Then, wipe with a dry cloth.
Do not use strong abrasive detergent when cleaning the camera body. Otherwise, it may cause discoloration.
When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.
Cleaning the lens
Use a lens cleaning paper (used to clean camera lenses or lenses of spectacles). When using solvent, use an alcohols solvent. Do not use a thinner or a glass cleaner.
SD memory card
•When insert an SD memory card into the SD memory card slot, turn the power of the camera off. Otherwise, it may cause malfunction or damage data recorded on the SD memory card.
Refer to page 17 for descriptions of how to insert/remove an SD memory card.
•When using an unformatted SD memory card, format it using this camera. Recorded data on the SD memory card will be deleted when formatted.
If using an unformatted SD memory card or using an SD card formatted with other device, the camera may not work proper- ly or performance deterioration may be caused.
Refer to the Operating Instructions (PDF) for descriptions of how to format an SD memory card.
•It is recommended to use Panasonic’s SD memory card.
8