Otherwise, the camera may not work properly or performance deterioration may be caused.
•Images saved on the SD memory card may lead to personal information leak- age. When it is necessary to give the camera to someone, even when for repair, make sure the SD memory card is removed from the camera.
•There are limited times to overwrite on an SD memory card.
It is recommended to replace the SD memory card when having a periodic maintenance of the camera.
Do not aim the camera at strong light sources.
A light source such as a spot light causes a blooming (light bleeding) or a smear (vertical lines).
Smear |
| Blight subject |
|
|
|
|
|
|
Blooming
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with IEEE802.3af standard.
Broadband router
When it is necessary to use a broadband router to connect the camera to the Internet, use a broadband router with the port for- warding function (NAT, IP masquerade).
Refer to the Operating Instructions (PDF) for further information about the port forwarding function.
Radio disturbance
When the camera is used near TV/radio antenna, strong electric field or magnetic field (near a motor or a transformer), images may be distorted and noise sound may be produced.
Do not install the camera in a humid or
Otherwise, lifetime of the internal parts may be shortened.
9