Preface, Features | Panasonic WV-NP244 manual

Preface

The network camera WV-NP244 is designed to operate using a PC on a network (10BASE- T/100BASE-TX) to monitor images. By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network. *1

Features

•Video signals captured by the progressive CCD (Charge-Coupled Device) will be convert- ed into JPEG or MPEG-4 streams, and they can be monitored at up to 30 fps (VGA resolu- tion).

•Audio captured by the built-in microphone can be monitored using a PC via a network.

•When connecting with a PoE (Power over Ethernet, IEEE802.3af compliant) device, power will be supplied by simply connecting a LAN cable. This achieves reduction of installation time including wiring work due to this wire-saving capability.

•1/3 inch progressive CCD solid-state image sensor with VGA resolution (640 x 480 pixels) achieves high-fidelity motion image scanning with high-resolution.

•The motion detection function that detects a motion in a designated surveillance area and issue an alarm signal is featured. *2

•The FTP backup function and recording of each log on an optional SD memory card are available using the featured SD memory card slot. *3

*1 It is necessary to configure the network settings of the PC and its network environment to monitor images and audio from the camera on the PC. It is also necessary that a web browser is installed on the PC.

*2 The motion detection function is not the dedicated function to prevent thefts, fires, etc..We assume no responsibility whatsoever for any damages resulting from the use of the motion detection function.

*3 This camera is applicable with Panasonic’s SD memory card (64 MB, 128 MB, 256 MB, 512 MB and 1 GB).