Call Transfer Feature
To Transfer from the Handset to the Base
1 Press int’cm/select on the handset. The caller is put on hold and the intercom tone sounds on the base.
2 Press int’cm/page or 
on the base. The intercom mode is activated, but the caller is still on hold.
3 To transfer the call to the base, press talk on the handset. To cancel
the transfer, press 
on the base.
To Transfer from the Base to the Handset
1 Press int’cm/page on the base. The caller is put on hold and the intercom tone sounds on the handset.
2 Press any key on the handset. The intercom mode is activated, but the caller is still on hold.
3 To transfer the call to the handset, press | on the base. To cancel the |
transfer, press talk on the handset. |
|
Chain Dialing
The memory locations on the handset and base are not limited to phone numbers, you may want to store in memory a group of numbers (up to 16 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
[ 30 ] T E L E P H O N E F E AT U R E S
