Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths.

Make sure the wall material is capable of supporting the weight of the base and handset.

Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone.

2 Set the retainer clip if necessary.

3 Refer to steps 1 through 4 on page 10 to mount the telephone.

G E T T I N G S TA R T E D [ 11 ]

G E T T I N G S T A R T E D

Page 13
Image 13
Uniden EXI3965 manual Direct wall mounting