B. Install the battery pack
Place the handset on the base unit and charge the battery pack for at least
Battery use time (per charge)
From fully charged:
•6 hours continuous use.
•10 days when the handset is in the standby mode.
Low battery alert
If the phone is not in use, “Low Battery” appears on the LCD and none of the keys will operate. If the phone is in use, “Low Battery” flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit
for charging.
note
•Use only the Uniden Battery supplied with your phone. Replacement batteries are also available through the Uniden Parts Department (See page 44) or www.uniden.com
•Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after each telephone call.
•If you must replace the battery pack during a telephone call, complete the replacement of the battery pack within 30 seconds, and you can return to the original call.
G E T T I N G S T A R T E D
G E T T I N G S TA R T E D [ 7 ]
